General Purpose Industrial Grade Accelerometers

ACC101

accelerometers

Se Alt Models Below

PLACE ORDER

Industrial Accelerometers
Ideal for Machine Vibration Monitoring
Low Impedance Drives Cable Lengths to 300 metres
Fast Turn-on Time (1 Sec.)
100 mV/g Output

Dynamisk måling - Vis relaterede produkter

Beskrivelse

Find how an accelerometer works on this link.

The ACC101 accelerometer is low cost yet extremely durable. These accelerometers are constructed using high strength aluminium, and feature a rugged strain relief, ¼-28 stud mounting, an epoxy seal, and use the kind of dependable components usually found only in higher priced accelerometers.

SPECIFICATIONS
Excitation: 2 mA nominal @ 24 to 30 Vdc, constant current (18 volt supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal @ 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±10 % rated output shift)
Amplitude Range: ±80 g peak with ACC-PS3A power supply/amplifier
Amplitude Linearity: ±1% up to 65 g peak
Temperature Range: -18 to 82°C
Temperature Sensitivity Effect:
-54 to 38°C ≤ 5% FS
38 to 121°C ≤ 8% FS
Thermal Shock: 1.2 g /°C
Transverse Sensitivity: 5% of axial maximum
Maximum g Without Damage: 5,000 g peak
Maximum g Without Clipping: ±80 g peak
Mounted Resonance Frequency: >18 kHz
Output Impedance: 50 Ω nominal
Bias Voltage: 10 V nominal
Base Strain: 0.002 g/microstrain max.
Noise Floor (wideband): 0.00025 g (rms)
Weight: 50 grams nominal (without cable)
Material: Aluminium, hard anodised thermal insulating boot included
Dimensions: 3.81 H x 2.54 cm hex base
Connector: 3 metre integral coaxial cable with BNCM
Mounting: 1/4-28 removable stud
Mounting Torque max: 40 cm-kg (35 in-lb)

Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.

Antal

Beskrivelse

ACC101

Kontakt salgsafdelingen

Beholdning:

Accelerometer with 3 metre cable

Accessories

MAGNET1

€124,62

Beholdning: 1 uge

Magnetic mounting base 4.5 kg holding force (10 lb) 19 mm diameter x 19 mm high.

Amplifiers and Power Supplies

ACC-PS3A-230VAC

Kontakt salgsafdelingen

Beholdning:

230 Vac powered constant current power supply (BNCF connections)

Interface cables used between power supply and instrumentation

ACC-CB4-6

Kontakt salgsafdelingen

Beholdning:

1.8 metre long coaxial cable (BNCM/BNCM)

ACC-CB4-15

€82,21

Beholdning: 1 uge

4.5 metre long coaxial cable (BNCM/BNCM)

ACC-CB5-2

€71,39

Beholdning: 8 uger

60 cm long coaxial cable (BNCM/banana plug)

ACC-CB6

€31,80

Beholdning: 1 uge

175 mm long coaxial cable (BNCM/pigtail)

† All amounts shown in EUR
Ordering Example: (1) ACC-CB5-2 60 cm long output cable for amplifer. BNC to banana plugs, €71,39