Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
3 kW to 12 kW immersion heaters have 3 elements which can be linked for single phase 240 Vac operation or wired individually for 3-phase 400/415 Vac operation. The 2 kW heater is for 240 Vac operation only. The 18 kW model is for 400/415 Vac 3-phase delta configuration only.
The immersion heaters include a built-in incoloy pocket with a 20 amp, 5 to 80°C or 30 to 90°C thermostat. See the to-order table below for specific thermostat ranges and lengths supplied with each model. To order with an optional high temperature 45 to 120°C 20 amp thermostat add "-HT" to the part number and check price or order using the part number builder below.
The IP55 rated aluminium head is approximately 120 mm diameter and 100 mm high. The brass boss has a 2¼" BSP thread and gasket for fitting in a tank through a suitable boss. An optional brass back nut and gasket is also available for alternative mounting.
To get the best service and optimum stratification it is recommended to mount the heater horizontally at the bottom of the tank. Care should be taken to ensure the elements are immersed at all times and are not allowed to run in sludge, to avoid burning out.
Please contact our sales department for screw in immersion heaters with 1¼, 1½, 2 or 2½ BSP brass fittings and 2¼ BSP in stainless steel.
† All amounts shown in EUR Noter: Cleaning and Maintenance: Whilst the heater does not attract deposits, in hard water areas scale may accumulate. It is essential that the heater section is cleaned frequently in these cases to avoid overheating and premature failure of the elements. This should be carried carefully to avoid damaging the sheath material.
Delnummerberegner
Build Your Part Number Below
Beskrivelse af tilvalg:
(1)
Heater Immersion Length and Wattage select from: ARMTIE210 for 2kw 254mm ARMTIE311 for 3kw 276mm ARMTIE330 for 3kw 762mm ARMTIE411 for 4kw 276mm ARMTIE416 for 4kw 406mm ARMTIE616 for 6kw 406mm ARMTIE630 for 6kw 762mm ARMTIE724 for 7.5kw 610mm ARMTIE914 for 9kw 356mm ARMTIE927 for 9kw 686mm ARMTIE936 for 9kw 914mm ARMTIE1224 for 12kw 610mm ARMTIE1236 for 12kw 914mm ARMTIE1836 for 18kw 914mm
(2)
Thermostat select from: Nothing(leave field blank) for standard thermostat -HT for 45 to 120 deg C thermostat
Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.
We noticed you are from the US. Visit your local site for regional offers and live support.