Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Fluidized Sand Baths

FSB Series

Fluidised Sand Bath | FSB Series

Fluidised Sand Bath

Se Alt Models Below

1 year warranty CE
  • Fluidised Sand Bath featuring a temperature Range: 50 to 600°C
  • Safe, Clean, Dry Heat
  • Burn-Out Protection
  • Stainless Steel Containers
  • Inconel-Sheathed Immersion Heaters
  • Built-in Pressure Switch and Overload Fuse
  • Rugged, Heavy-Duty, Accurate
  • Spill Flanges Standard on all Models
Kalibreringsudstyr - Vis relaterede produkter

Beskrivelse

Click on this link if you need more information about a calibrator.

When fluidised solids are heated, heat is distributed quickly and evenly throughout the bath and transferred rapidly to objects submerged in the bath. The bath temperature can be adjusted easily to the point at which you wish to calibrate or run a test.

Fluidised sand baths for calibration laboratories provide safe, rapid heat transfer and accurate temperature control, enabling you to efficiently and safely calibrate and maintain temperature sensitive instruments.

The principle of fluidisation occurs when a gas—usually low pressure air or nitrogen—flows upward through a partially-filled chamber or retort of dry, inert particles of aluminium oxide. The gas flows at a low velocity, which sets the particles in motion, separates them, then suspends them to a stable level to give the particles the appearance of turbulence quite similar to the state of boiling liquid.

Besides circulating and flowing like a liquid, fluidised solids exhibit excellent heat transfer characteristics.

Model No. Temperature
Range
Working Volume
dia. x depth
Overall Volume
dia. x height
Power
FSB-3 50 to 600°C 178 x 139 mm 330 x 457 mm 115 or 240 Vac
(Two 750 Watt Heater)
FSB-4 50 to 600°C 229 x 381 mm 381 x 660 mm 240 Vac
(Four 1 kW Heaters)


Pressure Regulator
Reduces the pressure of air from an industrial air line to suit the fluidised bath. The Regulator is supplied with a pressure gauge reading from 0 to 30 lb/in2 and a built-in air filter. Specify FSB-P-783.


NOTE: HEAVY WEIGHT - OVERWEIGHT SHIPPING CHARGES APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
  
FSB-3-240V
Kontakt salgsafdelingen    
Beholdning: 
 
 
Fluidized Sand Bath Termperature Probe Calibrator, 50 to 600°C Temperature Range, 230Vac Power
  
FSB-3
8.384,90
Beholdning: 15 uger 
 
Fluidized Sand Bath Termperature Probe Calibrator, 50 to 600°C Temperature Range, 115Vac Power
  
FSB-4
11.398,52
Beholdning: 13 uger 
 
Fluidized Sand Bath Termperature Probe Calibrator, 50 to 600°C Temperature Range, 240Vac Power
Accessories
  
FSB-A-25
€533,13
Beholdning: 15 uger 
 
Replacement Sand - 11kg Aluminium Oxide
  
FSB-A-100
€905,62
Beholdning: 9 uger 
 
Replacement Sand - 45kg Aluminium Oxide
  
FSB-F-784-A
€192,77
Beholdning: 1 uge 
 
Air Filter
All amounts shown in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.