Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Hot Water Meters for Totalization and Rate Indication with Pulse Output

FTB8000HW Series

Hot Water Meters for Totalization and Rate Indication with Pulse Output | FTB8000HW Series

237,21 FTB8007HW

1 year warranty
  • Flow Rates from 0.22 to 132 GPM
  • 150 psi Maximum Operating Pressure
  • 90°C (194°F) Maximum Operating Temperature
  • Field-Adjustable Pulse Output (Optional)
Flowmetre med turbine og skovlhjul - Vis relaterede produkter

Beskrivelse

The FTB8000HW Series meters use the multi-jet principle, which has been an internationally accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in lowquality water. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all FTB8000HW meters are the same. The difference between the -PR, -PT, and standard models is in the sensor. -PR model meters use a solid state, longlasting Hall-effect sensor, which requires power. -PT model meters use a 2-wire reed switch. They provide a dry-contact closure and do not require power. Basic FTB8000HW meters totalize only and do not have an output. Never install water meters above or over areas where leakage would cause damage.

SPECIFICATIONS
Materials:
    Body: Cast bronze
    Internals: Engineered thermoplastic
    Magnet: Permanent ceramic
Max Temperature: 90°C (194°F)
Max Operating Pressure: 150 psi
Accuracy: 1.5% of reading
Sensor:
    -PR: Hall-effect device
    -PT: Reed switch
Max Current: 20 mA
Max Voltage:
    -PR: 24 Vdc
    -PT: 24 Vdc or Vac
Sensor Power (-PR): Minimum 6 mA at 12 Vdc
Cable Length: 4 m (12') standard, 600 m (2000') max
Flow Rates (GPM):
NPT Size ¾ 1 2
Minimum 0.22 0.44 0.88 1.98
Maximum 22 52 88 132
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
FTB8007HW
237,21
Beholdning: 5 uger 
 
3/4NPT, 0.22 to 22 GPM, total only
FTB8010HW
392,98
Beholdning: 1 uge 
 
1NPT, 0.44 to 52 GPM, total only
FTB8015HW
790,00
Beholdning: 5 uger 
 
1 1/2NPT, 0.88 to 88 GPM, total only
FTB8020HW
1.142,00
Beholdning: 5 uger 
 
2NPT, 1.98 to 132 GPM, total only
FTB8007HW-PT
268,35
Beholdning: 1 uge 
 
3/4NPT, 0.22 to 22 GPM, 20 Pulse/gallon
FTB8010HW-PT
430,17
Beholdning: 3 uger 
 
1NPT, 0.44 to 52 GPM, 1 Pulse/gallon
FTB8015HW-PT
787,97
Beholdning: 5 uger 
 
1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon
FTB8020HW-PT
1.187,00
Beholdning: 5 uger 
 
2NPT, 1.98 to 132 GPM, 1 Pulse/gallon
FTB8007HW-PR
296,49
Beholdning: 5 uger 
 
3/4NPT, 0.22 to 22 GPM, 1 Pulse/gallon
FTB8010HW-PR
486,45
Beholdning: 5 uger 
 
1NPT, 0.44 to 52 GPM, 1 Pulse/gallon
FTB8015HW-PR
917,24
Beholdning: 5 uger 
 
1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon
FTB8020HW-PR
1.308,00
Beholdning: 5 uger 
 
2NPT, 1.98 to 132 GPM, 1 Pulse/gallon
All amounts shown in EUR
Noter: Comes with 2 MNPT couplings (already installed), 4m (12') cable, and complete operator’s manual. Only units that have an output signal (-PR or -PT) come with a cable.
We noticed you are from the US. Visit your local site for regional offers and live support.