Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

SmartStix™ I/O for the XL Series OCS

HE559 Series

SmartStix™ I/O for the XL Series OCS | HE559 Series

SmartStix™ I/O for the XL Series OCS

278,40 HE559DIM610

CE
  • Expands Analogue and Digital I/O of Any OCS Using a CsCAN Network
  • May be Used Locally or Remotely
  • Extemely Compact
  • Removable Screw Terminals
Automationscontrollere og HMI - Vis relaterede produkter

Beskrivelse

A New I/O for OCS
SmartStix™ I/O is a new terminal-block style I/O designed for use with the the XL series Operator Control Station (OCS). It can be used to expand the I/O capacity of any OCS, and it is very cost effective as remote I/O. SmartStix I/O connects to any OCS CsCAN™ network port to provide the best I/O selection for the application. And, output modules feature Electronic Short-Circuit Protection (ESCP).

Compact, DIN-Rail Mounted
SmartStix I/O is extremely compact, providing 16 and 32 point digital I/O in a package only 39 mm (1.5") deep and a footprint of 50 H x 116 W mm (2 x 4.5") or 50 H x 177 W mm (2 x 7"). With its small footprint, SmartStix I/O takes up very little panel space whether located in the main control panel or tucked away in a remote location. SmartStix I/O has a barrier style terminal strip and can be mounted on a DIN-Rail. Plus, removable terminals make field replacement fast and convenient.

Expands I/O Capacity, Local or Remote
SmartStix I/O easily expands the I/O capacity of any OCS utilising the CsCAN network port available with every model. It is especially cost effective when added to an XL Series OCS. SmartStix I/O offers fast response times without sacrificing robustness, with no need for a costly I/O interface unit. In addition to its peer-to-peer capabilities, CsCAN is used as a highly efficient method of distributing SmartStix I/O up to 1829 m (6000')* away.

Easy to Set Up
SmartStix require minimal time and complexity to configure. Just assign a unique ID, connect the 5-wire screened cable and you will be up and running in no time.

* Maximum distance is 457 m (1500') per segment, with up to 1829 m (6000') possible using repeaters.

SPECIFICATIONS
Bus Protocol: CsCAN (control station controller area network)
Bus Connector: 5-position terminal strip
Maximum Distance: 457 m (1500') per segment; 4 segments max
Maximum Number of Total Nodes: 253
Module Configuration Method: Module ID set using two rotary switches
LED Indication: I/O status (one per point); power, module status, network status
Output Protection: Electronic shortcircuit protection (16 and 32 output modules only)
Product Certifications: CE (all models), UL (digital only)
ANALOGUE INPUTS
Input Ranges: ±5V, ±10 Vdc, 4 to 20 mA, ±20 mA DC
Resolution: 14 bits
Accuracy@ 25°C: 0.1%
Input Impedance: 1 MΩ (voltage range), 150 Ω (mA range)
Isolation: 1000 Vdc IEC61010-1 300 VRMS
Maximum Continuous Overload: 150 Vac (±10V), ±30 mA (±20 mA), clamped at ±6V
DIGITAL INPUTS
Rated Input Current: 7 mA
Rated Voltage: 11 to 25 Vdc
ON Voltage Level: 19 Vdc or less
OFF Voltage Level: 6 Vdc or less
Input Characteristics Bidirectional Isolation Method: Photo coupler
OFF to ON Response: 0 to 3 ms or less
ON to OFF Response: 0 to 3 ms or less
ANALOG OUTPUTS
Output Ranges: ±5, ±10 Vdc, 4 to 20 mA, ±20 mA DC
Resolution: 14 bits
Accuracy@ 25°C: 0.1%
Load Resistance: 600 min (voltage), 500 max (mA)
Isolation: 1000 Vdc, IEC61010-1 300 VRMS
Output Characteristic: Sourcing
DIGITAL OUTPUTS
Operating Voltage: 24 Vdc
Rated Load Voltage: 24 Vdc
Output Type: Sourcing
Maxload Current: 0.5 A max per output 3 A per common
OFF to ON Response: 2 mS
ON to OFF Response: 2 mS
RELAY OUTPUTS
Rated Load Voltage: 24 Vdc, 220 Vac
Minimum Load Voltage/Current: 5 Vdc/1 mA
Maximum Load Current (Resistive): 2.0 A per channel, 5.0 A per common
OFF to ON Response: 10 mS max
ON to OFF Response: 12 mS max
Output Type: NO
Dimensions (Approx):
    32 I/O, Analog I/O or Relay Output: 176 L x 48 D x 50 mm H(7 x 1.9 x 2")
    16 I/O (Not Relay): 115 L x 48 D x 50 mm H(4.5 x 1.9 x 2")
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Digital I/O
HE559DIM610
278,40
Beholdning: 1 uge 
 
16 DC inputs (24 Vdc positive/negative logic) I/O expander for CsCAN with removable field terminals
HE559DIM710
478,49
Beholdning: 5 uger 
 
32 DC inputs (24 Vdc positive/negative logic) I/O expander for CsCAN with removable field terminals
HE559DIQ816
521,99
Beholdning: 5 uger 
 
16 DC inputs (24 Vdc positive/negative logic) plus 16 DC outputs (pos logic) 0.5 A I/O expander for CsCAN with removable field terminals
HE559DQM602
335,56
Beholdning: 5 uger 
 
16 relay outputs (250 Vac, 30 Vdc, 2 A) for CsCAN with removable field terminals
HE559DQM606
335,56
Beholdning: 5 uger 
 
16 DC outputs (24 Vdc positive logic, 0.5 A) I/O expander for CsCAN with removable field terminals
HE559DQM706
561,75
Beholdning: 5 uger 
 
32 DC outputs (24 Vdc, positive logic, 0.5 A) I/O expander for CsCAN with removable field terminals
Analogue I/O
HE559MIX577
832,67
Beholdning: 5 uger 
 
4 analogue inputs (±10V, ±20 mA) 14-bit resolution plus 2 analogue outputs (±10V, ±20 mA) 14-bit resolution; channel-by-channel voltage/current selection for all channels; for CsCAN with removable field terminals
All amounts shown in EUR
Noter: SmartStix I/O module comes with a 5-pin terminal style network connector. An optional m12 adaptor for m12 cable sets is available. SmartStix I/O have removable terminals and can be DIN-rail mounted.
We noticed you are from the US. Visit your local site for regional offers and live support.