Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Ultrasonic Level Transmitter and Controller

LVCN318 Series

Ultrasonic level transmitter | LVCN318 Series

Ultrasonic level transmitter

Se Alt Models Below

1 year warranty CE
  • Level Detection, Switch and Control Functions Up to 5.5 metres
  • Fast and Easy Configuration Via Free Software Download and USB Adaptor
  • Narrow 7.6 cm Beam Width and Short 20 cm Dead Band
  • Four Programmable Relays
  • PVDF Transducer and 6P Polycarbonate Enclosure
  • Automatic Temperature Compensation for Accurate Measurement
Niveaumåling - Vis relaterede produkter

Beskrivelse

Click on this link if you need more information about Level sensor.

OMEGA’s LVCN318 ultrasonic level transmitter and controller provides continuous level measurement up to 5.5 metres with a 4 to 20 mA signal output, and is configured with our free software via USB. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.

Specifications
Range: 5.5 m (18')
Accuracy: ±0.2% of range
Resolution: 2 mm (0.079")
Dead Band: 20 cm (8")
Beam Width: 7.62 cm (3")
Configuration: USB PC Windows®
USB 2.0 Memory: Non-volatile. The level sensor is configurable via our free PC software and USB.
Supply Voltage: 24 Vdc (loop)
Consumption: 0.5W
Loop Resistance: 400Ω max
Signal Output: 4 to 20 mA, two-wire
Signal Invert: 4 to 20 mA or 20 to 4 mA
Signal Fail-Safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Contact Type: (4) SPST relays
Contact Rating: 60 VA, 1A maximum
Contact Fail-Safe: Power loss; hold last
Echo Loss: Open, close or hold last
Hysteresis: Selectable
Process Temperature: -7 to 60°C (20 to 140°F)
Temp Comp: Automatic
Ambient Temperature: -35 to 60°C (-31 to 140°F)
Pressure: Maximum Working Pressure = 2 bar (30 psi)
Enclosure Rating: Type 6P, encapsulated, corrosion resistant and submersible
Encl Material: Polycarbonate
Trans Material: PVDF
Cable Jacket Material: Polyurethane
Cable Type: 9-conductor, shielded
Cable Length: 1.2 m (48")
Process Mount: 2" NPT or G2 (specifiy)
Mount Gasket: FKM
Classification: General purpose
Compliance: CE, RoHS
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
LVCN318
Kontakt salgsafdelingen    
Beholdning: 
 
 
Level transmitter, 4 to 20 mA, 4 relays, USB connector, 5.5 m range. 2" NPT process connection
LVCN318-G
965,81
Beholdning: 9 uger 
 
Level transmitter, 4 to 20 mA, 4 relays, USB connector, 5.5 m range, G2 (2" BSPP) process connection
All amounts shown in EUR
Noter: Comes complete with mounting gasket, and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.