Beskrivelse
Find how a Pressure Transducer works on this link or how we can customize your Pressure Sensor.
The PXM209/PXM219 series has been discontinued. Please see the PX309 series as a possible alternative or contact our Technical Sales department.
The pressure transmitter of the PXM209 Series general purpose are accurate, highly reliable general purpose voltage or current output transducers suitable for harsh industrial equipment applications. Their high performance is a result of the soild state full bridge construction which uses a micro-machined diffused silicon diaphragm and unique thin-film media with dielectric isolation barriers. The proprietary ASIC provides a wide temperature compensation including tight tolerances for zero balance and span.
Specifications
0 to 10 Vdc Output
Excitation: 24 Vdc @ 15 mA (12 to 35 Vdc)
Output: 0 to 10 Vdc ±1.5% (3 wire)
Zero Balance: 0 Vdc ±2% FSO
4 to 20 mA Output
Excitation: 24 Vdc (7 to 35 Vdc)
reverse polarity protected
Output: 4 to 20 mA ±1% FSO (2 wire)
Zero Balance: 4 mA ±2% FSO
Max Loop Resistance:
50 x (supply voltage - 10) |
Common Specifications
Accuracy: 0.25% FS (including linearity, hysteresis and repeatability)
Operating Temperature: -54 to 121°C
Compensated Temperature: -20 to 80°C
Thermal Effects: 0.04% FS/%°C
Proof Pressure: 150%
Burst Pressure: 300% range max
Response Time: 2 ms typical
Vibration Sensitivity: At 20 g peak
sinusoidal vibration from
10 Hz to 2000 Hz (12 mm D.A.), the
output shall not exceed 0.04% FS/g for
1 bar range to 0.005% FS/g for 7 bar and above
Natural Frequency: >35 kHz for 7 bar range
Gauge Type: Diffused silicon strain gauges
Wetted Parts: 316 SS, borosilicate
glass, silicon nitride, epoxy
Pressure Port: G 1/4 A male
Electrical Connections:
PXM209: 1m screened 4-core cable
PXM219: DIN 40050 plug, mating connector supplied (IP65)
Weight: 128 g
|
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Luk
