High Performance Pressure Transducer, Long Term Reliability, mV/V Output, METRIC, 0-1 to 0-600 bar

PXM5500 Series mV/V

bridge output pressure transducer

Se Alt Models Below

PLACE ORDER

High Accuracy 0.1%
Solid State Reliability
Sputtered Strain Gauge Design
High Shock and Vibration
Low Drift

Tryktransducere - Vis relaterede produkter

Beskrivelse

OMEGA’s PXM5500 Transducer Series provides high performance in demanding industrial and research applications where accuracy, reliability, and price are important. This transducer has a 10-year MTBF rate and is stable to 0.1% of FS over an 18 month period. This translates into less down time, fewer test reruns, more time between calibrations, and high confidence in your pressure data. When recalibration is impossible, relying on the high stability of the PXM5500 Series transducer may be the only cost-effective way to obtain pressure data over the long term. OMEGA’s thin film technology makes this premium in a performance possible. The strain gauges and associated structures are sputter-deposited directly onto the pressure sensing element thus eliminating the need for adhesives. The resulting molecular bond between the sensing element and the strain gauges ensures virtually no shifting, drifting, or creep in the performance of the transducer. The micro-geometry design of the PXM5500 sensing element results very small, low mass sensor that reduces effects of mechanical vibration and shock. The PXM5500 gives you the accuracy, reliability, and stability at competitive prices.

SPECIFICATIONS
Excitation: 10 Vdc
Output: 30 mV typical, 26 mV minimum
Input Resistance:800 to1500 Ohms
Output Resistance:800 to 1200 Ohms
Insulation Resistance: 500 MOhms @ 45 Vdc
Sensing Element: 4 active-arm bridge using sputter-deposited thin-film elements
Accuracy: ±0.10% FSO (BFSL) <70 bar ±0.15% FSO 70 bar and above (linearity, hysterisis and repeatability combined)
Calibration Stability: ±0.1% for 18 months
Vibration Sensitivity: At 35g peak sinusoidal vibration from 10 Hz to 2000 Hz ( 1 /2 " D.A.), the output shall not exceed 0.04% FSO/g for 1 bar range, decreasing to 0.003% FSO/g for 70 bar and above
Natural Frequency: 5 kHz for 1 bar, increasing logarithmically to 50 kHz for 300 bar
Shock: Qualification level of 100g, 11 milliseconds half sine wave without damage
Electrostatic Discharge (ESD): Protected to 15kV
Operating Temp Range: -54° to +150°C (-65° to +300°F)
Compensated Temp Range: -18° to +82° C (0° to +180°F)
Thermal Effects:
Span: ±0.0045% FSO/°F
Zero: ±0.0045% FSO/°C
Proof Pressure: 2.0 times rated pressure or 1,000 bar, whichever is less, will not cause changes in performance beyond the specified tolerance
Burst Pressure: 3.0 times rated pressure or 1,300 bar whichever is less, will not cause rupture of the pressure containment cavity
Wetted Parts: 17-4 PH or 15-5 PH Stainless Steel
Electrical Connection: Style "0" = 0.6 m Cable
Style "1" = PT1H-10-6P connector
Style "6" = micro DIN connector
Pressure Port: G 1/4 male standard
G 1/4 female and G 1/8 male or female optional
Mating Connector:Style "1" PTS06A-10-6S not included
Style "6" included
Weight: 200 g (7 oz) maximum

For special options consult Sales or Pressure Engineering.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

PXM5500MC0-001BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-1 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-1.60BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-1.6 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-004BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-4 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-006BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-6 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-010BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-10 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-016BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-16 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-025BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-25 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-040BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-40 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-060BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-60 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-100BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-100 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-160BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-160 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-400BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-400 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

PXM5500MC0-600BARGV

Kontakt salgsafdelingen

Beholdning:

Thin film metric transducer with 0-600 Bar range, G 1/4 male fitting, 0.6 meter cable and 3mV/V nominal output

† All amounts shown in EUR
Noter: To order Absolute Pressure models, change "G" in the part number to "A". No charge.
To order Sealed Gauge models, change "G" in the part number to "S". No charge.

Delnummerberegner

Build Your Part Number Below

	(1)	(2)		(3)		(4)	(5)
PXM5500			-		BAR

Beskrivelse af tilvalg:

(1) Pressure Port select from:
MA for G 1/8 male
MB for G 1/8 female
MC for G 1/4 male
MD for G 1/4 female

(2) Electrical Connection select from:
0 for 0.6 meter shielded cable
1 for PT1H-10-6P connector or equivalent (mating connector sold separately)
3 for 4 pin solder eyelet
6 for micro DIN connector (mating connector included)

(3) Pressure Range (Bar) select from:
001 for 0 to 1 Bar
1.60 for 0 to 1.6 Bar
004 for 0 to 4 Bar
006 for 0 to 6 Bar
010 for 0 to 10 Bar
016 for 0 to 16 Bar
025 for 0 to 25 Bar
040 for 0 to 40 Bar
060 for 0 to 60 Bar
100 for 0 to 100 Bar
160 for 0 to 160 Bar
250 for 0 to 250 Bar
400 for 0 to 400 Bar
600 for 0 to 600 Bar

(4) Pressure Units select from:
A for Absolute pressure
G for Gauge pressure
S for Sealed gauge pressure

(5) Output select from:
V for 3 mV/V nominal
5T for 0 to 5 Vdc
I for 4 to 20 mA

Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.