Resistance Wire and Heat-Curing Adhesive for Transducer Strain Gages

Resistance Wire

Se Alt Models Below

PLACE ORDER

RESISTANCE WIRE FOR TEMPERATURE COMPENSATION AND ZERO BALANCE
TT300 HEAT-CURING ADHESIVE

Belastningsmålere, tilbehør og instrumenter - Vis relaterede produkter

Beskrivelse

TT300 cement is a heat-curing, two-component, epoxy resin adhesive which is used to bond polyimide-backed strain gages for strain measurement in temperatures up to 200°C (392°F). The adhesive can also be used to bond epoxy- backed gages, but the maximum operating temperature is then limited to 150°C (302°F).

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

SGB-36

€109,78

Beholdning: 1 uge

36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C

SGC-36

Kontakt salgsafdelingen

Beholdning:

36 gage Copper wire (1500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C

SGM-36

€38,04

Beholdning: 9 uger

36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C

TT300

Kontakt salgsafdelingen

Beholdning:

Heat curing, two component adhesive kit for strain gage measurements up to 200°C (392°F)

† All amounts shown in EUR
Noter: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual