Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Microstepping Motor Drives

3540M

Microstepping Motor Drives | 3540M

Microstepping Motor Drives

Se Alt Models Below

  • DC Bus Voltage 12 to 42 Vdc Motor Supply (Including Ripple)
  • Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
  • Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
  • Enable Input to Turn Off Current to the Motor
  • Screw Terminal Connectors
  • MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
  • 3 State, Pulse Width Modulated Current Control, Switching at 20 to 30 KHz
Drev og motorer - Vis relaterede produkter

Beskrivelse

Click on this link if you need more information about Stepper motor.

The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, step phase sequencer with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.

The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.

The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.

Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Click here for more info on the ELC series PLC: ELC-PLC Series

Click here for more info on the OCS XL series PLC: OCS XL Series

Power Supply (Required for Drive Operation): Recommended: OMPS150A24
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
  
3540M
Kontakt salgsafdelingen    
Beholdning: 
 
 
Microstepping step motor drive, 3.5 A/phase, 40 VDC
  
3540MO
Kontakt salgsafdelingen    
Beholdning: 
 
 
Microstepping step motor drive with digital oscillator
Recommended Motors
  
OMHT17-075
114,28
Beholdning: 11 uger 
 
NEMA 17, 62.8 oz-in holding torque
  
OMHT23-397
Kontakt salgsafdelingen    
Beholdning: 
 
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-400
Kontakt salgsafdelingen    
Beholdning: 
 
 
NEMA 23, 264 oz-in holding torque
Accessories
Click to expand/minimize a list of what others bought with theOMPS150A24
OMPS150A24
Kontakt salgsafdelingen    
Beholdning: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
All amounts shown in EUR
Noter: To see torque-speed curves for recommended motors, click on "Specs" above.

Produkthåndbøger:

Download 3540M - Step Motor Driver
Download 3540MO Series - Step Motor Driver
We noticed you are from the US. Visit your local site for regional offers and live support.