Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

 - Discontinued Channel Strip Heater, Ceramic Insulated, 15.88 x 6.35 mm (5/8 x 1/4")

CSH1

CSH1 SERIES Channel Strip Heater, Ceramic Insulated | CSH1

CSH1 SERIES Channel Strip Heater, Ceramic Insulated

Se Alt Models Below

  • A Reliable Heat Source with Seamless Stainless Steel Sheath
  • Flat Surface Mounting Installations
  • Used in Hundreds of Industrial and Commercial Heating Applications
  • Ovens
  • Hot Plates
  • Dies
  • Molds
  • Drying
  • Melting
  • Baking
  • Incubators
  • Platens
  • Food Warmers
  • Welding Preheating
  • Air Heating
  • Sealing Bars
  • Thermoforming
  • Tank Heating
Stripvarmeaggregat - Vis relaterede produkter

Beskrivelse

Click here if you want to know more about strip heaters.

Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.

Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
    Lead Wire Termination: 10 amp
    Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
    16 mm (5/8") Wide Heaters: +0.000, -0.005"
    25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
    6 mm (1/4") Thick Heaters: +0.000, –0.005"
    8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
    Up to 24": ±1/16"
    Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")

Model No. Length Wattage Watt Density Type
120V 240V in mm Watt/in2 Watt/cm2
CSH00001 112 38.1 50 29 4 L
CSH00002 2 50.8 50 19 3 L
CSH00003 3 76.2 150 34 5 L
CSH00004 3 76.2 150 34 5 L1
CSH00005 4 101.6 200 33 5 L
CSH00006 5 127.0 240 30 5 L
CSH00007 CSH00008 5 127.0 240 30 5 L1
CSH00009 7 177.8 250 22 3 L1
CSH00010 CSH00011 9 228.6 350 24 4 L
CSH00012 9 228.6 350 24 4 L1
CSH00013 12 304.8 500 25 4 L
CSH00014 13 330.2 500 23 4 L
CSH00015 14 355.6 550 23 4 L1
CSH00016 18 457.2 900 29 5 L
CSH00017 CSH00018 18 457.2 900 29 5 L1
CSH00019 CSH00020 20 508.0 1000 29 5 L1
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
CSH00001
Kontakt salgsafdelingen    
Beholdning: 
 
 
120 Volt, 50 Watts, 1 1/2" Long, Type L
CSH00005
Kontakt salgsafdelingen    
Beholdning: 
 
 
120 Volt, 200 Watts, 4" Long, Type L
CSH00009
Kontakt salgsafdelingen    
Beholdning: 
 
 
120 Volt, 250 Watts, 7" Long, Type L
CSH00019
Kontakt salgsafdelingen    
Beholdning: 
 
 
120 Volt, 1000 Watts, 20" Long, Type L1
CSH00003
Kontakt salgsafdelingen    
Beholdning: 
 
 
240 Volt, 150 Watts, 3" Long, Type L
CSH00013
Kontakt salgsafdelingen    
Beholdning: 
 
 
240 Volt, 500 Watts, 12" Long, Type L
CSH00020
Kontakt salgsafdelingen    
Beholdning: 
 
 
240 Volt, 1000 Watts, 20" Long, Type L1

Bestil efter Vare nummer

Vare nummer
Antal 
Vare nummer
Antal 


All amounts shown in EUR
Noter: Part numbers shown are for heaters with Type L Termination with 254 mm (10") plain leads or Type L1 Termination with 254 mm (10") plain leads. Additional available terminations: Type R2 and Type W1 Mounting tabs are not available on this size.
We noticed you are from the US. Visit your local site for regional offers and live support.