Temperature and process Panel meters, 1/32 DIN
Testmålere - temperaturmåling - Vis relaterede produkter
Temperature and process High Quality panel meters! Free 5-Year Warranty Extension
User Friendly, Simple to Configure
High Accuracy ±0.5 °C, 0.03% Reading
Built-in 10 or 24 Vdc Excitation is standard on all units without communications options
Three-colour programmable display
iSeries Controller Models are available with a variety of Outputs. Refer to CNi32, CNi16, CNi8
iSeries strain meters for load cell inputs are also available. Refer to DPiS32
Click on this link if you need more information about Panel Meters.
OMEGA™ iSeries panel meters are among the most accurate in the industry and combine a wealth of advanced features whilst remaining simple to configure and use.
i/8, i/16, i32 Family
The DPi32 is a 1/32 DIN digital panel indicator and is part of the OMEGA™ iSeries family of microprocessor-based indicators and controllers which are also available in 1/8 and 1/16 DIN sizes. All have IP65 (NEMA-4) rated front panels. The iSeries instruments all share the same set-up and configuration menu's and method of operation, a tremendous time saver for integration of a large system.
High Quality and Reliability
The OMEGA™ DPi32 features an extended five year warranty at no extra charge. Every iSeries instrument is thoroughly calibrated and tested at several stages throughout production. The iSeries offers the highest accuracy for industrial instrumentation at 0.03% of reading.
|Programmable Colour Display The display can be programmed to change colour at an alarm point. For example, the instrument can be programmed to display the Process Value in GREEN during warm-up, switching to AMBER to signal the normal operating range, and in RED to signal an alarm condition. The changes in colour are quickly seen from a distance, and machine operators can intuitively react to changing conditions.
The instrument can also be programmed to display only one unchanging colour: GREEN, AMBER, or RED. This is a useful when using multiple meters to show different parameters in the same panel.
The iSeries offers the broadest selection of signal inputs available on one industrial instrument. The choices are easily selected from the Menu with four front panel push-buttons, or by serial communications:
Thermocouple types K, J, T, E, R, S, B, C, N, and J DIN.
RTD curves for Pt 0.00385 and 0.00392 at 100, 500 and 1000 ohms with a choice of 2-, 3- and 4-wire connections.
Process voltage ranges of 0-100 mV, 0-1 V and 0-10 V
Process current: 0-20 mA.
The optional analogue output can be programmed within a range of 0-10 Vdc or 0-20 mA.
The optional relay outputs can be programmed for High/Low, Above/Below or Band operation; latching or non-latching
Built-in Excitation Standard
The iSeries comes standard with built-in 24 Vdc @ 25 mA excitation for transmitters or other devices. ( not available with optional Isolated RS-232/RS-485 Serial communications.)
Isolated RS-232 and RS-485 Serial Communications
The iSeries are the first intelligent industrial instruments to offer both RS-232 and RS-485 serial communications in one instrument which can be selected from the menu. ASCII text and MODBUS serial protocols are both supported.
Free interface software is provided for easy set-up, configuration and data acquisition with the OMEGA™ iSeries. (Picture at right is an example of software that might be used).
† All amounts shown in DKK
Ordering Example: (1) DPI32 1/32 DIN Digital panel meter with universal input, DKK1.295,00
Build Your Part Number Below
Beskrivelse af tilvalg:
Input Type select from:Nothing(leave field blank)
for Temperature/Process MonitorS
Case Size select from:32
for 1/32 DIN16
for 1/16 DIN16A
for 1/16 DIN and isolated analog output8
for 1/8 DIN8A
for 1/8 DIN and isolated analog output8C
for 1/8 DIN with compact case
Network Options select from:Nothing(leave field blank)
for No Network Options-C24
for Isolated RS232 and RS485 300 to 19.2 k baud-EIT
for Ethernet with Embedded Internet (only for DPi/DPiS8)-C4EIT
for Ethernet with Embedded Web Server + Isolated RS485/422 hub for up to 31 devices (only for DPi/DPiS8)
Power Supply select from:Nothing(leave field blank)
for Standard Power (90 to 240 Vac/dc @ 50 to 400 Hz)-DC
for Low Voltage Power (12 to 36 Vdc/24 Vac for single display. 20 to 36 Vdc/24Vac for dual display ethernet or isolated analog output)
Factory Setup select from:Nothing(leave field blank)
for Standard Unit-FS
for Factory Setup and Configuration
Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.