Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

Thin Film Platinum RTD Elements. Pt100 and Pt1000 ohm, 2 x 2 mm

F2020

Pt100 and Pt1000 Platinum RTD elements - Order Online | F2020

Pt100 and Pt1000 Platinum RTD elements - Order Online

DKK14,75 F2020-100-A

RoHS
  • Low Cost OEM Price, minimum order quantity is 10pcs
  • w 2.1 x l 2.3 x d 0.9 mm elements with platinum clad nickel wire leads l 10 x dia. 0.2 mm
  • Class A and 1/3 B Tolerances
  • Temperature Range -50 to +300°C for Class A; 0 to +150°C for class 1/3B
  • Specification DIN EN 60751 (according to IEC 751)
  • Temperature Coefficient TCR = 3850 ppm/K
  • 100 and 1000 Ohm Configurations
RTD (PT100)-prober, -elementer og -enheder - Vis relaterede produkter

Beskrivelse

Click on this link if you need more information about Pt100.

These elements conform to the internationally accepted requirements of IEC60751, which defines the resistance vs. temperature characteristics of the sensors, their base resistance at 0°C and their accuracy (see below).

Class   Tolerance (°C)   Tolerance of
  resistance at 0°C (Ω)  
  Temperature  
Range
  1/3B (AA)   ±(0.1 + 0.0017t) ±0.04Ω 0 to +150°C
A ±(0.15 + 0.002t) ±0.06Ω -50 to +300°C

Long-term stability: Max. Ro drift 0.04% after 1000 hours at 500°C
Vibration resistance: At least 40g acceleration at 10 to 2kHz, depending on installation
Shock resistance: At least 100g acceleration with 8 ms half sine wave, depending on installation
Insulation resistance: >100 MΩ at 20 °C; >5 MΩ at 500 °C
Self heating: 0.4 K/mW at 0 °C
Measuring current: 100 Ω: 0.3 to 1 mA; 1000 Ω: 0.1 to 0.3 mA (self-heating should be considered)
Response time:
    Water (v = 0.4 m/s): t0.5 = 0.05 s; t0.9 = 0.15 s
    Air (v = 2 m/s): t0.5 = 3 s; t0.9 = 10 s
Dimensional tolerance: ±0.2 mm

Note: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.

Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
RoHS
Beskrivelse
Pt100 elements: 100 Ω at 0 °C
Quick Ship
F2020-100-A
DKK14,75
Beholdning: På lager
RoHS compliant
100 Ω Class A, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs
Quick Ship
F2020-100-1/3B
DKK27,50
Beholdning: På lager
RoHS compliant
100 Ω Class 1/3B, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs
Pt1000 elements: 1 kΩ at 0 °C
Quick Ship
F2020-1000-A
DKK14,75
Beholdning: På lager
RoHS compliant
1 kΩ Class A, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs
Quick Ship
F2020-1000-1/3B
DKK27,50
Beholdning: På lager
RoHS compliant
1 kΩ Class 1/3B, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs
All amounts shown in DKK
Ordering Example: (10) F2020-100-A Class A 2 x 2 mm Pt100 Elements, DKK14,750