Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Multi Parameter Mass Flowmeter

FMA6600 and FMA6700 Series

Multi Parameter Mass Flowmeter | FMA6600 and FMA6700 Series

Multi Parameter Mass Flowmeter

Se Alt Models Below

1 year warranty CE
  • Multi-Drop Capability of Up to 256 Units (for RS-485 Option)
  • Stores Calibration Data for Up to 10 Different Gases
  • Supports 10 Different Engineering Units Including User Defined
  • Programmable 12 Digits Totalizer Indicates Total Gas Volume
  • Flow Alarm Limits for High and Low Gas Flow with Relay Output
  • Pressure Alarm (FMA6700) Limits for High and Low Gas Pressure with Relay Output
  • Temperature Alarm (FMA6700) Limits for High and Low Gas Temperature with Relay Output
  • Digital (RS-232 or RS-485) and Analog Outputs Operate Simultaneously
  • Internal Conversion Factors for Up to 32 Gases
Elektroniske masseflowmetre - Vis relaterede produkter

Beskrivelse

More information about how a Flow meter works in this link.

Interface
All features of the FMA6600 and FMA6700 Series flow meters can be accessed via the local four button keypad and LCD. The digital interface operates via RS485 (optional RS-232 available) and provides access to applicable internal data including: flow, temperature, pressure reading, auto zero, totalizer and alarms settings, gas table, conversion factors and engineering units selection, dynamic response compensation and linearization table adjustment. The analog interface provides 0 to 5 Vdc or 0 to 10 Vdc or 4 to 20 mA outputs for flow, pressure and temperature (jumper selectable).
Auto Zero The FMA6600 and FMA6700 Series supports automatic sensor zero offset adjustment that can be activated locally via keypad or remotely via digital interface. The auto zero feature requires absolutely no flow through the meter during auto zero process. Provisions are made to either start, stop or save the current auto zero value via digital commands.
Totalizer
The total volume of the gas is calculated by integrating the actual gas flow rate with respect to time. Both keypad menu and digital interface commands are provided to: • set the totalizer to ZERO • start the totalizer at a preset flow • assign action at a preset total volume • start/stop totalizing the flow • read totalizer Totalizer conditions become true, when the totalizer reading and the "Stop at Total" volumes are equal.
Flow Alarm
High and Low gas flow ALARM limits can be preprogrammed via keypad or remotely via digital interface. ALARM conditions become true when the current flow reading is equal or higher/lower than corresponding values of high and low alarm levels. Alarm action can be assigned with preset delay interval (0-3600 seconds) to activate the contact closer (separate for High and Low alarm). Pressure Alarm (FMA6700 Series) High and Low gas pressure ALARM limits can be preprogrammed via keypad or remotely via digital interface. Pressure alarm conditions become true when the current pressure reading is equal or higher than corresponding values of high pressure alarm settings or equal or lower than corresponding values of low pressure alarm settings. Alarm action can be assigned to activate the contact closer (separate for High and Low pressure alarm). Temperature Alarm (FMA6700 Series) High and Low gas temperature ALARM limits can be preprogrammed via keypad or remotely via digital interface. Temperature alarm conditions become true when the current temperature reading is equal or higher than corresponding values of high temperature alarm settings or equal or lower than corresponding values of low temperature alarm settings. Alarm action can be assigned to activate the contact closer (separate for High and Low temperature alarm).
Engineering Units
The flow set points, measured gas flow and associated totalizer data are scaled directly in engineering units via the front panel keypad or digital interface. The following units of measure are supported: %F.S., L/min, L/h, mL/min, mL/h, SCFH, SCFM, LbPH, LbPM, User Defined EU. Multi-Gas Calibration The FMA6600 Series is capable of storing primary calibration data for up to 10 gases. This feature allows the same FMA6600 Series to be calibrated for multiple gases while maintaining the rated accuracy on each. Standard 10-Point NIST
Calibration
Optional up to 9 additional 10-point calibration may be ordered at an additional charge of $300 per gas. Conversion Factors Conversion factors for up to 32 gases are stored in the FMA6600 and FMA 6700 Series. In addition the provision is made for a user defined conversion factor. Conversion factors may be applied to any of the ten gas calibrations via keypad or digital interface commands.
Contact Closure
Two sets of dry contact relay outputs are provided to actuate user supplied equipment. These are programmable via local keypad or digital interface such that the relays can be made to switch when a specified event occurs (e.g. when a low or high flow, pressure or temperature alarm limit is exceeded or when the totalizer reaches a specified value). Leak Integrity 1 x 10-9 sccs of Helium maximum to the outside environment.
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Flow Meters
FMA6601
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 10 cc/min 1/4" Compression Fitting
FMA6602
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 20 cc/min 1/4" Compression Fitting
FMA6603
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 50 cc/min 1/4" Compression Fitting
FMA6604
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 100 cc/min 1/4" Compression Fitting
FMA6605
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 200 cc/min 1/4" Compression Fitting
FMA6606
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 500 cc/min 1/4" Compression Fitting
FMA6607
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 1 LPM 1/4" Compression Fitting
FMA6608
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 2 LPM 1/4" Compression Fitting
FMA6609
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 5 LPM 1/4" Compression Fitting
FMA6610
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 10 LPM 1/4" Compression Fitting
FMA6611
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 15 LPM 1/4" Compression Fitting
FMA6612
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 20 LPM 1/4" Compression Fitting
FMA6613
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 30 LPM 1/4" Compression Fitting
FMA6614
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 40 LPM 1/4" Compression Fitting
FMA6615
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 50 LPM 1/4" Compression Fitting
FMA6616
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 60 LPM 3/8" Compression Fitting
FMA6617
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 80 LPM 3/8" Compression Fitting
FMA6618
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 100 LPM 3/8" Compression Fitting
Flow Meters with Pressure and Temperature
FMA6701
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 10 cc/min 1/4" Compression Fitting
FMA6702
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 20 cc/min 1/4" Compression Fitting
FMA6703
2.116,17
Beholdning: På lager
 
Max Flow 50 cc/min 1/4" Compression Fitting
FMA6704
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 100 cc/min 1/4" Compression Fitting
FMA6705
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 200 cc/min 1/4" Compression Fitting
FMA6706
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 500 cc/min 1/4" Compression Fitting
FMA6707
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 1 LPM 1/4" Compression Fitting
FMA6708
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 2 LPM 1/4" Compression Fitting
FMA6709
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 5 LPM 1/4" Compression Fitting
FMA6710
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 10 LPM 1/4" Compression Fitting
FMA6711
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 15 LPM 1/4" Compression Fitting
FMA6712
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 20 LPM 1/4" Compression Fitting
FMA6713
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 30 LPM 1/4" Compression Fitting
FMA6714
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 40 LPM 1/4" Compression Fitting
FMA6715
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 50 LPM 1/4" Compression Fitting
FMA6716
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 60 LPM 3/8" Compression Fitting
FMA6717
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 80 LPM 3/8" Compression Fitting
FMA6718
Kontakt salgsafdelingen    
Beholdning: 
 
 
Max Flow 100 LPM 3/8" Compression Fitting
All amounts shown in EUR
Noter: Units come with complete operator’s manual and NIST traceable certificate for Nitrogen.
Power supply sold separately.
Note: Flow rates are stated for Nitrogen at STP conditions (21.1C (70F) at 1 atm).
Add “-I” to model number for 4 to 20 mA output instead of the standard 0 to 5 V output.
Add “-12V” to model number to power unit on 12 Vdc, add $50 to price.
Add “-24V” to model number to power unit on 24 Vdc, add $100 to price.
Add “-K” to model number to change to Kalrez O-rings, add $364 to price.
Add “-B” or “-E” to model number to change to Buna or EPR Orings, no additional charge.
Add “-VCR” to model number to change to VCR fittings add $100 to price.
Add “-RS232” to model number to replace RS-485 communications, no additional cost.
For each additional calibration add -(*) to the part number and $300.00 to the cost.
We noticed you are from the US. Visit your local site for regional offers and live support.