Masseflowmålere og -controllere med eller uden integreret display - NOT CE COMPLIANT - NOT FOR SALE in UK/EU.

FMA-A2100, FMA-A2200,FMA-A2300 and FMA-A2400

^€750,65 FMA-A2321

PLACE ORDER

Nøjagtighed ±1 %
Lineær udgang
Lav pris
Varmeteknologi
Til flowhastigheder op til 100 SLM
Strømforsyning medfølger
Fås med og uden lokalt LCD-display
Fås som controller, med indbygget styreventil

Masseflowanordninger - Vis relaterede produkter

Beskrivelse

The FMA-A2100/2200/2300/2400 Series Electronic Mass Flowmeters/ Controllers provide high performance, versatility and state-of-the-art design in one compact package.

The FMA-A2100/ 2200/2300/2400 uses capillary-type thermal technology to directly measure mass flow of gases. No temperature, pressure, or square root corrections are required.

The FMA-A2300/2400 Series comes with an LCD display, and all models come with linear 0-5 V and 4-20 mA output.

The FMA-A2100/2200/2300/2400 measures the mass flowrate of gases in 24 ranges from 0-10 SCCM to 0-100 SLM. For the complete listing, refer to the range table below. The FMA-A2100/2200/ 2300/2400 Series is compatible with most noncorrosive gasses. The user is advised to check the wetted materials against gas compatibility.

OMEGA’s Mass Flow Controllers use an internal electromagnetic proportional valve to control the mass flowrate. A command signal can be supplied either by the internal setpoint pot or by a 0-5 Vdc external source.

Range Table

Code	SCCM	Code	SLM	Code	SLM
00	0-10	06	0-1	15	0-40
01	0-20	07	0-2	16	0-45
02	0-50	08	0-5	17	0-50
03	0-100	09	0-10	18	0-55*
04	0-200	10	0-15	19	0-60*
05	0-500	11	0-20	20	0-65*
		12	0-25	21	0-70*
		13	0-30	22	0-75*
		14	0-35	23	0-100*

*Only for FMA-A2100/2300 Series

Model No.	Description
FMA-A21(*)	Mass flow meter without display, ranges 0-10 SCCM to 0-100 SLM
FMA-A22()-SS-(*)	Mass flow controller with control valve, ranges 0-10 SCCM to 0-50 SLM, 316 SS Std.
FMA-A23(*)	Mass flow meter with display, ranges 0-10 SCCM to 0-100 SLM
FMA-A24()-SS-(*)	Mass flow controller with display and control valve, ranges 0-10 SCCM to 0-50 SLM, 316 SS Std.

*Insert range code from table at top of page to complete model number. Add “-SS” for optional 316 stainless steel body and add £293 (€438) to cost of unit.
(1/4" compression fittings standard)
Note: All controller flow ranges specified are for nitrogen or air at 1.35barg when used for other gases, a correlation factor is needed to determine the flow rate. Meter flow rates are specified at nitrogen 1bara.
**Specify gas, inlet/outlet Pressure, temperature
All units are supplied with operator's manual, 9-pin sub-D connector and power supply.
Add -NIST5 to model number and a 5-point NIST traceable calibration certificate will be included free of charge.
Add -NIST10 for a 10-point NIST Calibration Certificate and add £84 (€125) to price of unit.

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

† All amounts shown in EUR
Noter: All controller flow ranges specified are for nitrogen or air at 1.35 barg. When used for other gasses, a correlation factor is needed to determine the flow rate. Meter flow rates are specified at nitrogen and 1 bara.
**Specify gas, inlet/outlet Pressure, temperature .
All units are supplied with operator's manual, 9-pin sub-D connector and power supply. For NIST traceable calibration certificate with test results add -NIST5 to model number and a 5-point NIST Certificate will be included free of charge. Add -NIST10 for a 10-point NIST Calibration Certificate and add £84 (€125) to price of unit.

Delnummerberegner

Build Your Part Number Below

	(1)	(2)	(3)	(4)
FMA-

Beskrivelse af tilvalg:

(1) Code in Part Number select from:
A21 for Mass flow meter without display
A22 for Mass flow controller with control valve
A23 for Mass flow meter with display
A24 for Mass flow controller with display and control valve

(2) Range Code select from:
00 for 0-10 SCCM
01 for 0-20 SCCM
02 for 0-50 SCCM
03 for 0-100 SCCM
04 for 0-200 SCCM
05 for 0-500 SCCM
06 for 0-1 SLM
07 for 0-2 SLM
08 for 0-5 SLM
09 for 0-10 SLM
10 for 0-15 SLM
11 for 0-20 SLM
12 for 0-25 SLM
13 for 0-30 SLM
14 for 0-35 SLM
15 for 0-40 SLM
16 for 0-45 SLM
17 for 0-50 SLM
18 for 0-55 SLM
19 for 0-60 SLM
20 for 0-65 SLM
21 for 0-70 SLM
22 for 0-75 SLM
23 for 0-100SLM

(3) Optional 316 Stainless Steel Body select from:
Nothing(leave field blank)
-SS for optional 316 stainless steel body

(4) Code in Partnumber select from:
Nothing(leave field blank)
(**) for specify gas inlet/outlet pressure temperature
Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.