Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Magnetiske induktive flowsensorer

FMG70 Series

Magnetiske induktive flowsensorer | FMG70 Series

Magnetiske induktive flowsensorer

Se Alt Models Below

CE
  • Ingen bevægelige dele
  • Ingen blokering af flowet
  • Intet yderligere trykfald
  • Hurtig reaktionstid (< 500 msek.)
  • Minimale krav om lige rørstrækning
Magnetiske flowmålere - Vis relaterede produkter

Beskrivelse

The FMG70 series from OMEGA allows a unique and highly reliable measuring technique to be introduced into areas of process control previously considered not possible.

Changes of temperature, density, viscosity, concentration or electrical conductivity (minimum conductivity of 50 µS/cm) of the fluid do not affect the output signal.

FMG70 series can be used in areas where flow sensors with moving parts eg. paddle wheel sensors, cannot be applied due to contamination or particulates in the media. The sensor is intended for continuous measurement of flow rates or for dosing and batching. The output signal frequency (or current) is proportional to the flow.

Specifications
Model
FMG71
FMG72
FMG73
Flow Range
1 to 20 l/min
2 to 40 l/min
10 to 200 l/min
Accuracy
±2% of reading
Signal Output Starts from
Approx. 0.5 l/min
Approx. 1 l/min
Approx. 5 l/min
Repeatability
2%
Liquid Type and Minimum Conductivity
Water and other conductive liquids with minimum conductivity of 50 µS/cm
Maximum Liquid Temperature
90 °C
Ambient Temperature
5 to 70 °C
Maximum Pressure
16 bar (PN 16)
Diameter
DN 7
DN 10
DN 20
Process Connection
G1/2A or 1/2" NPT
G1/2A or 1/2" NPT
G1A or 1" NPT
Flow Indication
Green LED, blinking proportional to flow rate
Output Signals
Frequency Output
Pulse Rate
855 pulses/litre
855 pulses/litre
200 pulses/litre
Resolution
1.2 ml/pulse
1.2 ml/pulse
5 ml/pulse
Signal Shape
Square wave NPN, internal pull-up resistor 2 kΩ. Pulse duty ratio 50:50
Signal Current
Maximum of 20 mA, current limited
Analogue Output
Signal and Range
4 to 20 mA proportional to 0 to 20 l/min
4 to 20 mA proportional to 0 to 40 l/min
4 to 20 mA proportional to 0 to 200 l/min
Current Limitation
26 mA approx.
Maximum Burden
250 Ω to GND
General
Response Time
< 500 mS
Electrical Connection
M12 x 1 plug
Power Supply
24 Vdc ±10%
Current Consumption
Max. 80 mA
Electrical Protection
Shortcircuit proof (up to 30 V) and polarity protection (up to -30 V)
Mechanical Protection Class
IP 65 (NEMA 4X)
Materials
Electrodes
Stainless steel 316 TI (1.4571)
Process Connections
Stainless steel 316 TI (1.4571)
Measuring Pipe
PEEK-GF30
Gasket
EPDM
Housing
Cast Aluminium


Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
Magnetic Inductive Flow Sensors with BSP (G) Process Connection
  
FMG71-BSP
Kontakt salgsafdelingen    
Beholdning: 
 
 
1 to 20 l/m. 855 pulses/litre, DN 7 (1/4") pipe and G 1/2A process connection
  
FMG72-BSP
Kontakt salgsafdelingen    
Beholdning: 
 
 
2 to 40 l/m. 855 pulses/litre, DN 10 (3/8") pipe and G 1/2A process connection
  
FMG73-BSP
Kontakt salgsafdelingen    
Beholdning: 
 
 
10 to 200 l/m. 200 pulses/litre, DN 20 (3/4") pipe and G 1A process connection
  
FMG71-A-BSP
Kontakt salgsafdelingen    
Beholdning: 
 
 
4 to 20 mA output, 1 to 20 l/m. DN 7 (1/4") pipe and G 1/2A process connection
  
FMG72-A-BSP
Kontakt salgsafdelingen    
Beholdning: 
 
 
4 to 20 mA output, 2 to 40 l/m. DN 10 (3/8") pipe and G 1/2A process connection
  
FMG73-A-BSP
1.835,00
Beholdning: 5 uger 
 
4 to 20 mA output, 10 to 200 l/m. DN 20 (3/4") pipe and G 1A process connection
Magnetic Inductive Flow Sensors with NPT Process Connection
  
FMG71
Kontakt salgsafdelingen    
Beholdning: 
 
 
1 to 20 l/m. 855 pulses/litre, DN 7 (1/4") pipe and 1/2" NPT process connection
  
FMG72
Kontakt salgsafdelingen    
Beholdning: 
 
 
2 to 40 l/m. 855 pulses/litre, DN 10 (3/8") pipe and 1/2" NPT process connection
  
FMG73
Kontakt salgsafdelingen    
Beholdning: 
 
 
10 to 200 l/m. 200 pulses/litre, DN 20 (3/4") pipe and 1" NPT process connection
  
FMG71-A
Kontakt salgsafdelingen    
Beholdning: 
 
 
4 to 20 mA output, 1 to 20 l/m. DN 7 (1/4") pipe and 1/2" NPT process connection
  
FMG72-A
Kontakt salgsafdelingen    
Beholdning: 
 
 
4 to 20 mA output, 2 to 40 l/m. DN 10 (3/8") pipe and 1/2" NPT process connection
  
FMG73-A
1.931,59
Beholdning: 1 uge 
 
4 to 20 mA output, 10 to 200 l/m. DN 20 (3/4") pipe and 1 NPT process connection
Accessories
Click to expand/minimize a list of what others bought with theM12C-PVC-4-R-F-5
M12C-PVC-4-R-F-5
€23,54
Beholdning: 1 uge 
 
5 metre cable with right angle M12 x stripped leads
  
M12C-PVC-4-R-F-10
€27,97
Beholdning: 1 uge 
 
10 metre cable with right angle M12 x stripped leads
  
PSU-24V-UNIVERSAL
Kontakt salgsafdelingen    
Beholdning: 
 
 
24 Vdc 0.75A power supply. 90 to 260 Vac powered, with international plug adapters. 1.8 metre long output lead with stripped ends.
Click to expand/minimize a list of what others bought with theCNI3233
CNI3233
333,20
Beholdning: 7 uger 
 
1/32 DIN Process meter/controller for 4-20mA input. 4 digit display with dual relay outputs. 90-240 Vac powered
  
DPF702
Kontakt salgsafdelingen    
Beholdning: 
 
 
1/8 DIN Panel meter for frequency input. 6 digit display. 230 Vac powered
All amounts shown in EUR
Noter: Comes complete with operator’s manual.


We noticed you are from the US. Visit your local site for regional offers and live support.