Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Skovlhjul til flowsensorer

FP-5100 and FP-5300

Skovlhjul til flowsensorer | FP-5100 and FP-5300

Skovlhjul til flowsensorer

377,39 FP-5300

2 year warranty
  • Nøjagtighed inden for ±0,2 fps
  • Gentagelighed inden for ±0,1 fps
  • Enkel og nøjagtig flowmåling
Flowmetre med turbine og skovlhjul - Vis relaterede produkter

Beskrivelse

Streamline your flow measurement operation with the FP-5100 Series flow sensor. Using this compact flow sensor, a matched sensor installation fitting, an OMEGA™ flow meter or controller, and ordinary handtools, you can assemble a complete flow monitoring or controlling system in minutes. Accurate to ±0.2 fps, with repeatability at ±0.1 fps, this insertion sensor operates on a simple electromechanical principle, proven in thousands of liquid flow applications worldwide. It all adds up to precision, dependability, and convenience– basic advantages that are quickly surpassing its in-line competition.

Convert your maintenance hours into minutes with the FP-5300. Should a sensor, rotor, or O-ring need to be replaced, it takes only seconds. Reduce your system downtime substantially with a stand-alone FP-5300 sensor, or simply add a Wet Tap Assembly and eliminate downtime completely. Combined with the FP-5300 during initial installation, the Wet Tap allows sensor removal without system shut-down. Optional local or remote capability lets you place your meter up to 200 feet away without signal amplification, and you can install the FP-5300 in pipe sizes ranging from 1/2 inch to 36 inches without a lot of additional cost, because the price of the FP-5300 increases only slightly for larger pipe sizes.

Available in a choice of chemically resistant, non-contaminating housing materials, the FP-5300 stands up to the harshest environments. The glass-filled polypropylene housing version is lightweight but strong, which makes it ideal for handling a wide range of liquids, including corrosive fluids in chemical processing. For processes involving acids and solvents, the PVDF (polyvinylidene fluoride) housing version is a tough fluorocarbon that is highly resistant to more severe fluids.

The sensor works on a simple but precise electromechanical principle based on measuring the rate and volume of flow in your pipe. Four permanent magnets, imbedded in the rotor blades, spin past a coil in the sensor body. As the fluid flow causes the rotor to move, a sine wave signal is produced, directly proportional to the flowrate. The patented “open cell” feature of the rotor ensures a linear, repeatable output, up to 20 fps, with accuracy of ±0.2 fps. The result is minimal head loss and no cavitation.

Designed to allow optional conduit installation, the FP-5300 easily lets you comply with local codes requiring conduit protection. For instance, pry off the plug on top of the sensor: underneath, you’ll find a 1/2 FNPT thread. Using an optional conduit adaptor fitting kit, you can connect your conduit FPM-5000-SCAK conduit adaptor kit), and an optional instrument back-cover kit will provide everything you need for quick conduit connection to a meter or controller. Additionally, you can adapt to both rigid and flexible liquid-tight conduits, protecting your system hookup from harsh elements and mechanical damage.

Flow Range
Pipe
Size
½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8" 10" 12"
Range
(gpm)
1
to
19
1.7
to
34
2.7
to
54
4.7
to
94
6.4
to
127
10.6
to
210
15
to
300
24
to
461
40
to
794
63
to
1247
91
to
1801
156
to
3119
246
to
4915
349
to
6977

SPECIFICATIONS
Accuracy: ±1% full scale
Output Signal: 1 V p-p/fps
Output Frequency: 6 Hz/fps nominal
Flow Rate Range: 1 to 20 fps
Source Impedance: 8 kΩ
Maximum Pressure:
   FP-5300 Series: 180 psig max @ 20°C (68°F)
   FP-5100 Series: 200 psig max @ 20°C (68°F)
Minimum Temperature: 0°C (32°F)
Maximum Temperature: See chart on spec sheet for complete temperature and pressure rating
Pressure Drop: Equal to 2.5 m (8') of straight pipe
Material:
   Transducer Housing: glass-filled polypropylene or PVDF
   O-Rings: FKM
   Shaft: Titanium or Hastelloy C(PVDF optional)
   Rotor: PVDF
Maximum % Solids: 1% of fluid volume, non-abrasive, nonmagnetic, <100 micron diameter and length
Standard Cable Length: 7.5 m (25')
Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
Paddlewheel Flow Sensors (Fitting Required)
Click to expand/minimize a list of what others bought with theFP-5300
FP-5300
377,39
Beholdning: 1 uge 
 
Titanium shaft polypropylene housing, for pipe sizes 1/2 to 4"
Click to expand/minimize a list of what others bought with theFP-5301
FP-5301
410,49
Beholdning: 1 uge 
 
Titanium shaft polypropylene housing, for pipe sizes 5 to 8"
  
FP-5302
446,18
Beholdning: 7 uger 
 
Titanium shaft polypropylene housing, for pipe sizes 10 or larger
  
FP-5100
685,13
Beholdning: 1 uge 
 
Hastelloy C shaft, PVDF housing, for pipe sizes 1/2 to 4"
  
FP-5101
746,87
Beholdning: 7 uger 
 
Hastelloy C shaft, PVDF housing, for pipe sizes 5 to 8"
Wet Tap Units
  
FP-3193
Kontakt salgsafdelingen    
Beholdning: 
 
 
Titanium shaft polypropylene housing, for pipe sizes 1/2 to 4" Wet Tap Assembly
  
FP-3194
Kontakt salgsafdelingen    
Beholdning: 
 
 
Titanium shaft polypropylene housing, for pipe sizes 5 to 8" Wet Tap Assembly
  
FP-3195
Kontakt salgsafdelingen    
Beholdning: 
 
 
Titanium shaft polypropylene housing, for pipe sizes 10" and up Wet Tap Assembly
Popular Fittings
Click to expand/minimize a list of what others bought with theFP-5307
FP-5307
Kontakt salgsafdelingen    
Beholdning: 
 
 
3/4" PVC
Click to expand/minimize a list of what others bought with theFP-5307CU
FP-5307CU
424,64
Beholdning: 9 uger 
 
3/4" Copper
Click to expand/minimize a list of what others bought with theFP-5310M
FP-5310M
248,45
Beholdning: 1 uge 
 
1" molded PVC
Click to expand/minimize a list of what others bought with theFP-5320GI
FP-5320GI
181,29
Beholdning: 9 uger 
 
2" Galvanized Iron
Click to expand/minimize a list of what others bought with theFP-5340CS
FP-5340CS
€207,89
Beholdning: 9 uger 
 
4" Carbon Steel Weldolet
Popular Panel Meters
Click to expand/minimize a list of what others bought with theDPF701
DPF701
Kontakt salgsafdelingen    
Beholdning: 
 
 
1/8 DIN Panel Meter for Rate or Totalization
Click to expand/minimize a list of what others bought with theDPF75
DPF75
€366,05
Beholdning: 4 uger 
 
1/8 DIN Panel Meter for Rate and Totalization
Accessories
  
FPM-5000-SCAK
€74,60
Beholdning: 7 uger 
 
Sensor Conduit Adapter Kit
Click to expand/minimize a list of what others bought with theFMK-1538-2
FMK-1538-2
€74,13
Beholdning: 4 uger 
 
Replacement Rotor/Paddlewheel
Click to expand/minimize a list of what others bought with theFMK-1546-1
FMK-1546-1
€58,05
Beholdning: 7 uger 
 
Replacement titanium rotor pin
  
FMK-51545-1
€141,45
Beholdning: 7 uger 
 
Replacement PVDF rotor and rotor pin
All amounts shown in EUR
Noter: Comes complete with operator's manual.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)


Produkthåndbøger:

Download DPF700
Download FPM-9020A
Download FPM-9010A
We noticed you are from the US. Visit your local site for regional offers and live support.