Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
This product has been discontinued. Please contact sales for the best alternative product
The FPD2000 Series represents a
positive displacement meter that is
affordable and accurate. One
primary feature is the ability to
maintain consistent accuracy
despite changing viscosity
conditions. This reliability, coupled
with a large turndown range, offers
an affordable replacement for older
turbine technology. The meter’s
solid construction and excellent
dynamic response are well suited
to the measurement of oil, grease,
fuel, solvents, polyurethanes,
brake fluid, skydrol as well as
other nonabrasive lubricating fluids.
Since there is no need for straight
run piping upstream or downstream
of the flow meter, the FPD2000 flow
meters are simple to use and to
install. The meters produce good
resolution and high accuracy at low
flow rates. Flow may be bidirectional,
such as for cylinder
position measurements, without
damage to internal parts.
SPECIFICATIONS Accuracy: ±0.5% over 10:1 turndown with 30cP fluid Repeatability: ±0.1% Max Fluid Temperature: Aluminum Body: Meter 85°C (185°F) Stainless Body: Meter 204°C (400°F) Pressure Maximum: 345 bar (5000 psi) Wetted Materials Body: FPD2000 Series: Aluminum FPD2010 Series: 303 stainless steel FPD2020 Series: 316 stainless steel Gear: Stainless steel O-Ring: PTFE, FKM (optional) Bearings: Stainless steel
Outputs Temperature Range (Electronics): -40 to 85°C (-40 to 185°F) Square Wave: (Basic unit) Supply Voltage: +10 to 28 Vdc Supply Current: 8 mA @ 12 Vdc, 12 mA @ 24 Vdc Duty Signal: 50% ±15% Minimum Signal: 0.5 Hz Frequency: Flow dependent, up to 2000 Hz Driving Capacity: 50 mA max resistive load Output Impedance: 40Ω - analog switch and self-resetting fuse
Analog Output (-A Models) Supply Voltage: 10 to 30 Vdc Output: 4 to 20 mA Input: 0.25 Hz to 5 KHz Amplitude: 1 Vp-p to 40 Vp-p Update Time: 1/F + 25 msec Linearity: ±0.01% of reading Enclosure Certifcations: NEC Class 1 groups C, D, Class 2 groups E, F, G
† All amounts shown in EUR Noter: Comes with complete operators manual.
We noticed you are from the US. Visit your local site for regional offers and live support.