Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
The OMEGA™ FSW-160 is the
newest heavy-duty line of flow
switches. The switch is used to
signal, start, or stop electronically
operated equipment when flow or
no-flow conditions occur.
Omega’s elastomeric sealing
system is superior to the metal
bellows that are subject to metal
fatigue and corrosion. This seal
system has been field-proven for
over a decade. The FSW-160 can
be used in pipes 1 inch and larger,
with set-points as low as
4 GPM (15.2 LPM) to over
500 GPM (1893 LPM) in larger
pipe sizes. The FSW160 uses a
15A SPDT micro switch that can
control a 1/2 horsepower motor.
Specifications Hysteresis (? Flow Rate to Activate/
Deactivate Switch)
10% at upper end of flow range
30% at lower end of flow range Differential Pressure Drops
Across Unit Under Normal
Operating Conditions:
1 to 3" pipe, less than 1 psi
4 to 48" pipe, negligible Working Line Pressure:
200 psig maximum [proof tested to
1200 psig at 21°C (70°F)] Working Temperature: 121°C (250°F)
maximum continuous Wetted Materials: Body and Lid: Brass Shaft: 304 stainless steel Paddle: 316 stainless steel Seal: EPDM Electrical Switch Characteristics
SPDT 15 A, 1/2 hp at 125 or 250 Vac
0.5 A at 125 Vdc (tungsten lamp)
0.25 A @ 250 Vdc (tungsten lamp)
† All amounts shown in EUR Noter: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.