Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

Non-Contact Voltage Tester with Adjustable Sensitivity

HHM-NCV40

Voltage Detector with Adjustable Sensitivity | HHM-NCV40

Voltage Detector with Adjustable Sensitivity

DKK95,00 HHM-NCV40

1 year warranty CE
  • Provides a Safe (Non-Contact) and Convenient Way to Check Whether an Electrical Conductor or Installation is Live
  • Beeper Sounds and Red LED Flashes When Voltage is Detected
  • Wide Voltage Range
  • Adjustable Sensitivity Takes the Guesswork Out of Identifying the Live Conductor in a Bundle
  • Safe for CAT IV 1000V Use
  • Built-In Bright White LED Light
  • Pocket Clip
Procesmåling og instrumenter til styring - Vis relaterede produkter

Beskrivelse

The HHM-NVC40 provides a safe, non-contact way to check if an electrical cable, plug or socket is live. It does so by sensing from a short distance the electromagnetic field created by AC voltage. Even unloaded AC circuits generate electromagnetic fields. Although these fields are extremely weak, their constantly changing nature means that they generate some current.

A sensitive non-contact voltage detector can sense this current via induction, in much the same way that a sensitive radio receiver can sense weak radio waves. Non-contact voltage (NCV) detectors, including the HHM-NCV40, cannot detect DC voltages (such as those found in automotive electrical systems) or AC voltage through a wall or metal conduit.

Unlike the typical NCV detector, the HHM-NCV40 has adjustable sensitivity—a feature that makes it possible to determine which wire in a bundle is the live wire. This application calls for turning down the sensitivity in stages after the HHM-NCV40 senses voltage. As you reduce sensitivity, at some stage only the live wire will produce a field strong enough to activate the audible and visual alarms from a short distance. In this way, the HHM-NCV40’s adjustable sensitivity takes the guesswork out of identifying the live wire of a bundle.

The HHM-NCV40 also has a wider detection range (5 to 1000 Vac) than a typical NCV tester.

Specifications
Detection Range: 5 to 1000 Vac at 50 to 400 Hz
Detection Distance: 64 mm max.
Power Source: 2 “AAA” batteries (included)
Operating Temperature: 0 to 40°C @ <85% RH
Dimensions: 154 L x 32 W x 28 mm D
Weight (with Batteries): 55 grams
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Quick Ship
HHM-NCV40
DKK95,00
Beholdning: 1 uge 
 
Non-contact voltage detector with adjustable sensitivity
All amounts shown in DKK
Noter: Comes complete with 2 “AAA” batteries and operator’s manual.
Ordering Example: (1) HHM-NCV40 Non-contact voltage detector with adjustable sensitivity, DKK95,00