Discontinued - USB Output Low Profile Compression Load Cells

LC411_LCM411-USBH

Compression Load Cells with usb interface

Se Alt Models Below

PLACE ORDER

High speed USB load cell with up to 1000 Readings per Second
Free Logging and Charting Software Available
5-Point NIST Traceable Calibration Provided
USB 2.0 and Below Compatible, Powered Completely by the USB Port
All Stainless Steel for Harsh Industrial Environments
Built-In 59K Shunt Cal Resistor

Belastningsceller, kraftsensorer og momenttransducere - Vis relaterede produkter

Beskrivelse

This item is discontinued.

More information about how a load cell works in this link.

The LC411-USBH Series high speed USB load cells connect directly to your computer. Free PC software makes data logging and charting your readings a simple task. Also included are .NET APIs and a command set for command line access. No additional power supply is needed. The load cell is powered directly from your computer’s USB port.

SPECIFICATIONS
Excitation: From USB port
Output: Digital (USB 2.0)
5-Point Calibration: Included 0%, 50%, 100%, 50%, 0%
Note: Models > 300,000 lbf are calibrated at 300,000 lbf. Full scale calibrations above 300,000 lb by quotation only.
Response Time: Up to 1 ms; non-impact loading
Linearity:
    ≤3000 lb: ±0.13% full scale
    >3000 lb: ±0.10% full scale
Hysteresis:
    ≤3000 lb: ±0.12% full scale
    >3000 lb: ±0.10% full scale
Repeatability: ±0.05%
Zero Balance: ±1.0% full scale
Operating Temperature: -40 to 80°C
Compensated Temperature: 16 to 71°C
Thermal Effects:
    Zero: 0.0045%FSO/°C
    Span: 0.006%FSO/°C
Safe Overload: 150% full scale capacity
Ultimate Overload: 300% full scale capacity
Full Scale Deflection: 0.025 to 0.076 mm typical
Electrical Connection: 1.8 m cable with standard USB connector
Protection Class: IP65

† All amounts shown in EUR
Noter: Comes complete with 5-point NIST traceable calibration, cable with USB connector, and PC software. Dual bridge models available, add suffix “-DUAL” to model number and additional cost.