Sensorer for låsekraft, 0-10 kN til 0-500 kNewton

LCM900 Series

^€458,96 LCM901-6-10KN

PLACE ORDER

Monteringsskiver medfølger
2-punkts kalibreringscertifikat medfølger
Konstrueret helt i rustfrit stål

Belastningsceller, kraftsensorer og momenttransducere - Vis relaterede produkter

Beskrivelse

OMEGA’s LCM900 Series bolt force sensor is a compression load cell designed to measure the clamping force of a bolt. With excellent long term stability and all stainless steel construction, the LCM900 Series delivers high reliability in severe industrial environments. This unit is designed to operate by mounting on a flat surface between two mounting washers (included).

SPECIFICATIONS
Excitation: 5 Vdc (10 V max)
Output: 2 mV/V nominal
Accuracy: ±3.5% FSO Linearity, Hysteresis and Repeatability Combined
Zero Balance: ±4% FSO
Operating Temp Range: -54 to 93°C (-65 to 200°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects: Zero: ±0.018% FSO/°C Span: ±0.036% of Rdg/°C
Safe Overload: 130% of Capacity
Ultimate Overload: 150% of Capacity
Bridge Resistance: 120 .Nominal
Construction: Stainless Steel
Electrical Connection: 1.2 m (4 ft) Insulated Shielded Cable

Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.

Antal

Beskrivelse

LCM901 Models, 1.2 m cable with stripped ends

LCM901-6-20KN

€458,96

Beholdning: 5 uger

20 kN capacity bolt sensor for 6 mm bolt with 1.2 metre cable with stripped ends

LCM901-13-130KN

€486,34

Beholdning: 5 uger

130 kN capacity bolt sensor for 13 mm bolt with 1.2 metre cable with stripped ends

LCM901-16-200KN

€531,98

Beholdning: 1 uge

200 kN capacity bolt sensor for 16 mm bolt with 1.2 metre cable with stripped ends

LCM901-19-300KN

€632,04

Beholdning: 9 uger

300 kN capacity bolt sensor for 19 mm bolt with 1.2 metre cable with stripped ends

LCM901-38-500KN

€658,45

Beholdning: 9 uger

500 kN capacity bolt sensor for 38 mm bolt with 1.2 metre cable with stripped ends

LCM911 Models, 1.2 m cable with PT06A10-6S connector

LCM911-13-130KN

€577,61

Beholdning: 5 uger

130 kN capacity bolt sensor for 13 mm bolt with PT06A10-6S connector installed on 1.2 metre cable

LCM911-16-200KN

€565,88

Beholdning: 5 uger

200 kN capacity bolt sensor for 16 mm bolt with PT06A10-6S connector installed on 1.2 metre cable

LCM911-19-300KN

€645,40

Beholdning: 9 uger

300 kN capacity bolt sensor for 19 mm bolt with PT06A10-6S connector installed on 1.2 metre cable

Accessories

PT01F10-6P

Kontakt salgsafdelingen

Beholdning:

Mating Connector. (Required for LCM911 models)

Bestil efter Vare nummer

Vare nummer

Antal

Vare nummer

Antal

† All amounts shown in EUR
Noter: Supplied complete with load washers, 2-point calibration certificate and instruction sheet.