Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

Metric Multiconductor Feedthroughs

MFT Metric Series

Metric Multiconductor Feedthroughs | MFT Metric Series

Metric Multiconductor Feedthroughs

Se Alt Models Below

  • Pressure or Vacuum Applications
  • Seals Multiple Thermocouples and Protection Tubes
  • Available in Both NPT and ISO T/BPST Mounting Threads
  • Up to 16 Probes in 1 Fitting
  • Blank Sealing Plugs Included
  • 3 to 16 Probes
  • 416 SS Body and Cap
  • 316 SS Ferrules Standard
  • PTFE Ferrules Available
  • OMEGALOKR Ferrules Standard
  • 1 to 6 mm (0.040 to 1.4") Probe Diameters
Termokoblerstik og panelsystemer - Vis relaterede produkter

Beskrivelse

These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.

All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Thread is ISO/BPST
Quick Ship
MFT-M10-3
DKK705,00
Beholdning: 4 uger 
 
1.0mm probe, 3 probes, 1/4in. Thread
Quick Ship
MFT-M10-5
DKK835,00
Beholdning: 5 uger 
 
1.0mm probe, 5 probes, 1/4in. Thread
Quick Ship
MFT-M10-6
DKK890,00
Beholdning: 5 uger 
 
1.0mm probe, 6 probes, 1/4in. Thread
Quick Ship
MFT-M15-3
DKK625,00
Beholdning: 5 uger 
 
1.5mm probe, 3 probes, 1/4in. Thread
Quick Ship
MFT-M30-3
DKK575,00
Beholdning: 3 uger 
 
3.0mm probe, 3 probes, 1/4in. Thread

Bestil efter Vare nummer

Vare nummer
Antal 
Vare nummer
Antal 


All amounts shown in DKK
Noter: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown in the Order By Part Number fields. Add additional cost per ferrule. One ferrule needed for each conductor.
Ordering Example: (1) MFT-M10-6 1.0mm probe, 6 probes, 1/4in. ISO/BPST Thread, DKK890,00

Delnummerberegner

Build Your Part Number Below
Beskrivelse af tilvalg:


(1) Diameter of Probe select from:
-M10 for 1.0mm
-M15 for 1.5mm
-M30 for 3.0mm
-M45 for 4.5mm
-M60 for 6.0mm

(2) Number of Probes select from:
-3 for 3 probes
-5 for 5 probes
-6 for 6 probes
-8 for 8 probes
-10 for 10 probes
-12 for 12 probes
-16 for 16 probes
Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.