Lightweight Oil Immersion Heater With 2" NPT Steel Fitting

MTO-2 Series

MTO2_LIGHT Series Lightweight Oil Immersion Heater

^€439,30 MTO-215A/120V

PLACE ORDER

Rugged Steel Sheath for Use with Lightweight Oils
1.5 to 6 kW
120 280, 240 or 480V. Single Phase

Dykvarmeaggregater - Vis relaterede produkter

Beskrivelse

Please Note: The immersion heater should be used with an approved temperature control device to assure safe operation. See Temperature Section for our selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	E1 General Purpose Enclosure¹		E2 Moisture Resistant Enclosure.²
kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	Model No.	Wt. Ib (kg)	Model No.	Wt. Ib (kg)
1.5	24	2	11 3/4(30)	MTO-215A/*	3 (1)	MTO-215E2/*	6 (3)
2	24	2	17 3/4 (45)	MTO-220A/*	4 (2)	MTO-220E2/*	7 (3)
2.5	26	2	19 5/8 (9)	MTO-225A/*	4 (2)	MTO-225E2/*	7 (3)
3	23	2	24 7/8 (63)	MTO-230A/*	4 (2)	MTO-230E2/*	7 (3)
4	23	2	32 3/4 (83)	MTO-240A/*	6 (3)	MTO-240E2/*	8 (4)
5	23	2	40 1/4 (102)	MTO-250A/*	7 (3)	MTO-250E2/*	8 (4)
6	23	2	47 3/4 (121)	MTO-260A/**	7 (3)	MTO-260E2/**	9 (4)

/*Designate voltage, i.e., insert 120 for 120 Vac, 208 for 208 VAC, 240 for 240 Vac, or 480 for 480 Vac.
//* Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
1 Heaters with General Purpose Enclosures are UL recognized and CSA Certified.
2 Heaters with Moisture Resistant Enclosures are CSA NRTL/C Certified.

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

MTO-215A/120V

€439,30

Beholdning: 6 uger

Heater, 1.5 kW, 120 V, E1 general purpose enclosure

MTO-225A/208V

€540,21

Beholdning: 6 uger

Heater, 2.5 kW, 208 V, E1 general purpose enclosure

Bestil efter Vare nummer

Vare nummer

Antal

Vare nummer

Antal

† All amounts shown in EUR
Ordering Example: (1) MTO-215A/240V 1.5 kW heater powered by 240 Vac, €450,79

Delnummerberegner

Build Your Part Number Below

	(1)	(2)		(3)
MTO-2			/

Beskrivelse af tilvalg:

(1) Wattage select from:
15 for 1.5 kW
20 for 2 kW
25 for 2.5 kW
30 for 3 kW
40 for 4 kW
50 for 5 kW
60 for 6 kW

(2) Enclosure select from:
A for General Purpose Enclosure
E2 for Moisture Resistant Enclosures

(3) Voltage select from:
120V for 120 V
208V for 208 V
240V for 240 V
480V for 480 V

Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.