Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Microprocessor-based, pH and ORP Transmitters  - Discontinued

PHTX-692,ORTX-692

 | PHTX-692,ORTX-692

Se Alt Models Below

  • Indicates pH, Temperature, mV and mA Output
  • Single or Two-Point Automated Calibration
  • Automatic Recognition of Pre-Selected Buffer Values
  • Diagnostic Error Messages
  • Surface Mount, NEMA 4X Enclosure
  • Isolated

Beskrivelse

For accurate measurements of pH and ORP, the model PHTX-692 and ORTX-692 transmitters provide local indication as well as a 4-20 mA output. The large PHTX-692 LCD can alternately indicate pH, temperature, the sensor’s millivolt signal or the 4-20 mA output. The ORTX-692 measures ORP and provides a similar indication, except for pH. Each model requires only two wires, common for both output and power. No special cables are necessary. The isolated, dc current loop output features high noise immunity, permitting use of a simple twisted pair of wires. A single dc voltage power source can power multiple transmitters. The PHTX-692 uses either a 1000 ohm RTD or 300 ohm thermistor for automatic temperature compensation. Compatible sensors are described in this section.

When calibrating and configuring the instrument, clear, easily understood procedure messages will prompt the operator. Preprogrammed diagnostic messages flash automatically if system operating problems occur.

The isolated 4-20 mA instrument output eliminates problems caused by electrical interference. An output hold function can maintain the output during calibration or while configuring the instrument. A range expand feature allows the 4-20 mA output to represent a single pH unit or larger segment of the measuring scale (50 mV for model ORTX-692).

Both models are simple to operate. Using a watertight keypad, an operator configures and calibrates the system, and displays measurement data, without having to open the enclosure door.
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
  
PHTX-692
Kontakt salgsafdelingen    
Beholdning: 
 
 
Two-Wire pH Transmitter
  
ORTX-692
Kontakt salgsafdelingen    
Beholdning: 
 
 
Two-Wire ORP Transmitter
Click to expand/minimize a list of what others bought with theU24Y101
U24Y101
Kontakt salgsafdelingen    
Beholdning: 
 
 
24 V DC Power Supply
Click to expand/minimize a list of what others bought with thePHE-6510
PHE-6510
Kontakt salgsafdelingen    
Beholdning: 
 
 
Submersible Electrode (Requires mounting assembly)
  
PHEH-65-10
€101,22
Beholdning: 3 uger 
 
Mounting Assembly for PHE-6510
  
PHA-4710
Kontakt salgsafdelingen    
Beholdning: 
 
 
Buffer kit accessory - 4,7,10 Capsules(2 of each)
Click to expand/minimize a list of what others bought with thePHA-4
PHA-4
€16,67
Beholdning: På lager
 
4.01 pH buffer solution 475 ml bottle
Click to expand/minimize a list of what others bought with thePHA-7
PHA-7
€16,67
Beholdning: På lager
 
7.01 pH buffer solution 475 ml bottle
Click to expand/minimize a list of what others bought with thePHA-10
PHA-10
€16,67
Beholdning: På lager
 
10.01 pH buffer solution 475 ml bottle
All amounts shown in EUR
 
We noticed you are from the US. Visit your local site for regional offers and live support.