Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Omega's PR-21 Series RTD sensors can be used in a wide variety of applications, including:
Stand alone immersion sensors.
Installed directly into your process using a variety of standard mounting threads.
In other applications using available compression fittings or other accessories.
The PR-21 RTD sensors are made with 316L Stainless Steel probes welded to 316L Stainless Steel housings for
strength and corrosion resistance. The sensors include a 4-pin, M12 A-Coded male connector for easy connection
to patch cables or extension cables.
These RTD sensors can be used in any 2, 3 or 4-wire application by using only those wires needed for your connection. This allows for simplified, trouble free installations with
any existing applications. This also allows the PR-21 series sensor to be used for a wide variety of replacement applications
since it can be connected as-is with just about any measurement or control equipment available when combined with a
4-pin female M12 connector extension or patch cable.
† All amounts shown in EUR
Delnummerberegner
Build Your Part Number Below
Beskrivelse af tilvalg:
(1)
Mounting Thread select from: A for Non Threaded Housing F for M10x1 G for G 1/2 H for G1/4
(2)
Element Specification select from: 100-A for Pt100 Class A 1000-A for Pt1000 Class A
(3)
Probe Diameter select from: M6 for 6mm Probe Diameter M3 for 3mm Probe Diameter
(4)
Probe Length select from: 0150 for 150mm Probe Length 0250 for 250mm Probe Length 0350 for 350mm Probe Length
Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.