Pt100-probe med hygiejnearmatur og beskyttelseshoved

PRS-NB9W, Hygienic Pt100 Probes

Se Alt Models Below

PLACE ORDER

3-A-godkendt design
Til brug i hygiejniske processer, Clean-In-Place, fødevareindustrien, bryggerier, biotek og lægemidler samt mejerier
Beskyttelseshovedet er et skruedæksel i hvid polypropylen. IP68 med M20-kabelindføring. Klassificeret til 165° C
Standardprocestilkoblingen er en 1½" Tri-Grip™ (kompatibel med Tri-Clamp®). Andre størrelser og modeller leveres
Fugtede overflader er 316L rustfrit stål, overfladefinish = 32 mikrotommer eller bedre
Prober til standardcyklus diameter 6 mm og krævende cyklus diameter 9,5 mm reduceret til to 4,5 mm kan leveres
Fås med standardprobelængder 75, 100, 125 og 150 mm, andre længder kan leveres
4-kablet, Pt100, klasse A RTD-platinsensor (100,00 ±0,06 Ω ved 0° C) som standard
Temperaturområde for procesmåling: -50 til +200°C

RTD (PT100)-prober, -elementer og -enheder - Vis relaterede produkter

Beskrivelse

The 3-A Approved OMEGA^® PRS-S-NB9W and PRS-H-NB9W Series RTD Sensors are designed for use in Hygienic or Sanitary Clean-in-Place applications in the Food, Dairy, Brewing and BioPharmaceutical industries. These sensors are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-03 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes.

The probe stems are manufactured in two diameters; with a 6 mm diameter probe for standard duty service, and a stepped 9.5 mm to 4.5 mm diameter probe for good response times in heavy duty applications. A white polypropylene connection head provides a convenient threaded entry for process wiring.

Hygienic Sensor Specifications Include:

   • 316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.
   • Probe lengths of 75, 100, 125 or 150 millimetres available as standard, other lengths available on request.
   • Sensor Output is a 4-wire, 100 ohm, Class A, Platinum Pt100 RTD meeting the requirements of IEC 60751.
   • These sensors can be used with 2, 3 or 4-wire systems; see information below.
   • Insulation resistance: 100 megohms minimum at 100 VDC.
   • Thermal response time of less than 2.5 seconds in water flowing at 1 m/sec (63% response).
   • Optional stainless steel connection heads available.

These probes are supplied with 4-wire elements as standard. The head contains a four way terminal block with two red and two white terminals. When used in 3-wire applications simply connect to three of the terminals (typically two red and one white). When used in 2-wire applications, connect to one of the red terminals and one of the white terminals.

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

6 mm Diameter, Standard Duty Probes

PRS-3-100-A-S-M075-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 75 mm long standard duty 6 mm dia. probe with white polypropylene screw cap head

PRS-3-100-A-S-M100-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 100 mm long standard duty 6 mm dia. probe with white polypropylene screw cap head

PRS-3-100-A-S-M125-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 125 mm long standard duty 6 mm dia. probe with white polypropylene screw cap head

PRS-3-100-A-S-M150-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 150 mm long standard duty 6 mm dia. probe with white polypropylene screw cap head

9.5 mm Diameter Sheath with 4.5 mm Diameter Reduced Tip, Heavy Duty Probes

PRS-3-100-A-H-M075-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 75 mm long heavy duty probe with white polypropylene screw cap head

PRS-3-100-A-H-M100-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 100 mm long heavy duty probe with white polypropylene screw cap head

PRS-3-100-A-H-M125-D1-NB9W

Kontakt salgsafdelingen

Beholdning:

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 125 mm long heavy duty probe with white polypropylene screw cap head

PRS-3-100-A-H-M150-D1-NB9W

€195,85

Beholdning: 4 uger

4-wire Pt100 RTD sensor (100 Ω Class A accuracy) with 1½" 16AMP cap, 150 mm long heavy duty probe with white polypropylene screw cap head

† All amounts shown in EUR
Noter: For other flange sizes and styles, or for thermistor and thermocouple versions of this sensor, please contact Sales.

Options:
For a stainless steel screw top head, change "NB9W" in part number to "NB13"
For longer probe lengths change length in model number to required length in mm.
Please contact sales for additional pricing and to place an order for non-standard items