Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

High Temperature Foundry Thermocouple Probes

SP-HF-K Series

High Temperature Foundry Thermocouple Probes | SP-HF-K Series

High Temperature Foundry Thermocouple Probes

DKK1.745,00 SP-HF-K-6

  • Type K, CHROMEGA™-ALOMEGA™ Thermocouple Elements
  • Measures Hot Metal Surfaces
  • Rated up to (1260°C) 2300°F
  • Extra Heavy-Duty Design
  • 1/4" Diameter Contact Elements
  • Works with High Temperature Impedance Type K Temperature Readouts
  • Rugged, Heavy-Duty Aluminum Handle
Termokoblere - Vis relaterede produkter

Beskrivelse

SP-HF dimensions

Specifically designed for use where surface temperatures reach up to 1260°C (2300°F) and rough handling is routine, OMEGA’s Foundry Probe uses large, heavy-duty tips that can penetrate surface slag to measure the true temperature of the casting. The surface to be measured must be electrically conductive. The thermocouple's lead wires are 16-gage stranded wire with high temperature insulation and stainless steel overbraiding for added protection.

Note: Will not work with analog display systems requiring 10 or 15 ohm input impedance.
   Specifications
Calibration: Type K, CHROMEGA™-ALOMEGA™ Maximum Temperature: 1260°C (2300°F)
Contacts: 1/4" pointed Lead Wire: 183 cm (6'), stainless steel overbraiding
Probe Length: 762 mm (30")
Handle: Rugged Aluminum, type HDX


View the Thermocouple Accuracy and Color Code charts
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Quick Ship
SP-HF-K-6
DKK1.745,00
Beholdning: 4 uger 
 
Foundry probe with spade lugs termination
Quick Ship
SP-HF-K-6-OST-M
DKK1.780,00
Beholdning: 1 uge 
 
Foundry probe with OST male connector termination(OST connectors use an economical hollow pin design)
All amounts shown in DKK
Noter: Probe Tips Must Contact Measurement Surface for Accurate Readings
Ordering Example: (1) SP-HF-K-6-OST-M high temperature foundry probe, type K, 6 inches long with an OST male standard size connector long with an OST male standard size, DKK1.780,00