Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Step and Direction Stepper Drives

STR Series

Step and Direction Stepper Drives | STR Series

Step and Direction Stepper Drives

162,95 STR2

1 year warranty CE
  • Sophisticated Current Control
    •STR2: 2 A/phase
    •STR4: 4 A/phase
    •STR8: 8 A/phase
  • Anti-Resonance for Optimized Torque and Smoothness Over a Wide Speed Range
  • Microstep Emulation for Creating Smooth Motion Even with Low-Resolution Step Signals
  • Up to 20,000 Steps/Revolution
  • Step and Direction or CW/CCW Pulse Operation
  • Built-In Noise Filter on STEP and DIR Inputs
  • Large Family of Compatible 2-Phase Stepper Motors
Drev og motorer - Vis relaterede produkter

Beskrivelse

The STR series stepper drive is a compact, powerful, digital step and direction drive available in three power ranges: 2 A/phase, 4 A/phase and 8 A/phase. The STR series is ideal for applications requiring basic step and direction control of a 2-phase step motor. STR drives feature advanced microstepping performance and sophisticated current control with anti-resonance. Anti-resonance electronically damps motor and system resonances, which improves motor smoothness and torque over a wide speed range.

All setup is done via dip switches and a rotary switch on the side of the drive, including motor selection, running current, idle current, and step resolution.

STR drives are available with a large family of compatible 2-phase step motors, selected to optimize performance of both the drive and motor.

NOTE: These drives require step pulses from a PLC or other controller.

SPECIFICATIONS
POWER AMPLIFIER SECTION (STR2)
Amplifier Type:
MOSFET, dual H-bridge, 4 quadrant
Current Control: 4 state PWM at 20 kHz
Output Current: Up to 2.2 A/phase, depending on motor selection
Switch Selectable % of Maximum Current: 100%, 90%, 80%, 70%
Power Supply: External 12 to 48 Vdc power supply required
Idle Current Reduction: Reduction to 50% or 90%, switch selectable

POWER AMPLIFIER SECTION (STR4)
Amplifier Type:
MOSFET, dual H-bridge, 4 quadrant
Current Control: 4 state PWM at 20 kHz
Output Current: Up to 4.5 A/phase, depending on motor selection
Switch Selectable % of Maximum Current: 100%, 90%, 80%, 70%
Power Supply: External 24 to 48 Vdc power supply required
Idle Current Reduction: Reduction to 50% or 90%, switch selectable

POWER AMPLIFIER SECTION (STR8)
Amplifier Type:
MOSFET, dual H-bridge, 4 quadrant
Current Control: 4 state Pwm at 20 kHz
Output Current: Up to 8 A/phase, depending on motor selection Switch
Selectable % of Maximum Current: 100%, 90%, 80%, 70%
Power Supply: External 24 to 75 Vdc power supply required
Idle Current Reduction: Reduction to 50% or 90%, switch selectable

CONTROLLER SECTION
Mode Of Operation:
Step and direction, Cw/Ccw
Microstep Resolution: Switch selectable: 200, 200 smooth, 400, 400 smooth, 2000, 5000, 12800, 20000 steps/revolution
Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 50 rps
Anti Resonance: Raises the system damping ratio; eliminates midrange instability and allows stable operation to 50 rps
Waveform: Allows for fine adjustment of phase current waveform harmonic content to reduce low-speed torque ripple in the range 0.25 to 1.5 rps
Digital Noise Filter: Step pulse input: 150 kHz or 2 MHz, jumper selectable
Self Test Switch Selectable: Rotates motor 2 revolutions in each direction
Control Inputs: Step, direction, enable, optically isolated; 4 to 30 Vdc, 5 to 15 mA.
Step Input: Min pulse width = 250 ns; max pulse frequency = 2 MHz
Fault Output: Photodarlington, 80 mA, 30 Vdc max; voltage drop = 1.2 Vdc max at 80 mA
Ambient Temperature: 0 to 50°C (32 to 122°F) humidity 90% non-condensing
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
  
STR2
162,95
Beholdning: 3 uger 
 
Step and direction stepper drive with 2A output
  
STR4
304,46
Beholdning: 8 uger 
 
Step and direction stepper drive with 4A output
  
STR8
375,07
Beholdning: 5 uger 
 
Step and direction stepper drive with 8A output
Accessories
Click to expand/minimize a list of what others bought with theOMPS150A24
OMPS150A24
Kontakt salgsafdelingen    
Beholdning: 
 
 
Power supply with active PFC filter, 24 Vdc, 6.3A
  
OMPS300A48
Kontakt salgsafdelingen    
Beholdning: 
 
 
Power supply with active PFC filter, 48 Vdc, 6.7A
  
OMRC-050
€243,68
Beholdning: 1 uge 
 
Regeneration clamp, 24 to 80 Vdc
  
Power Cord-SE
€12,18
Beholdning: 4 uger 
 
AC Power cord with stripped end termination
Recommended Motors for STR2
  
OMHT11-013
€168,49
Beholdning: 6 uger 
 
NEMA 11 stepper motor, 15 oz-in holding torque, 1.0 A/phase
  
OM5014-842
Kontakt salgsafdelingen    
Beholdning: 
 
 
NEMA 14 stepper motor, 26 oz-in holding torque, 1.0 A/phase
  
OMHT17-075
€114,28
Beholdning: 11 uger 
 
NEMA 17 stepper motor, 62.8 oz-in holding torque, 1.7 A/phase, parallel connection
  
OMHT17-275
€83,83
Beholdning: 5 uger 
 
NEMA 17 stepper motor, 62.8 oz-in holding torque, 1.7 A/phase, parallel connection
Recommended Motors for STR4 / STR8
  
OMHT17-075
€114,28
Beholdning: 11 uger 
 
NEMA 17 stepper motor, 62.8 oz-in holding torque, 1.7 A/phase, parallel connection
  
OMHT17-275
€83,83
Beholdning: 5 uger 
 
NEMA 17 stepper motor, 62.8 oz-in holding torque, 1.7 A/phase, parallel connection
  
OMHT17-278
€99,11
Beholdning: 3 uger 
 
NEMA 17 stepper motor, 113 oz-in holding torque, 2.0 A/phase, parallel connection
  
OMHT23-603
€184,60
Beholdning: 3 uger 
 
NEMA 23 stepper motor, 354 oz-in holding torque, 2.5 A/phase, series connection
  
OMHT24-100
€111,34
Beholdning: 5 uger 
 
NEMA 24 stepper motor, 123 oz-in holding torque, 2.8 A/phase
  
OMHT24-105
€126,00
Beholdning: 5 uger 
 
NEMA 24 stepper motor, 177 oz-in holding torque, 4.0 A/phase
  
OMHT24-108
€224,15
Beholdning: 5 uger 
 
NEMA 24 stepper motor, 354 oz-in holding torque, 4.0 A/phase
  
OMHT34-485
€424,84
Beholdning: 1 uge 
 
NEMA 34 stepper motor, 650 oz-in holding torque, 4.3 A/phase, series connection
  
OMHT34-486
€549,37
Beholdning: 5 uger 
 
NEMA 34 stepper motor, 1200 oz-in holding torque, 4.1 A/phase, series connection
  
OMHT34-504
€167,02
Beholdning: 5 uger 
 
NEMA 34 stepper motor, 396 oz-in holding torque, 3.18 A/phase, series connection
  
OMHT34-505
€230,01
Beholdning: 1 uge 
 
NEMA 34 stepper motor, 849 oz-in holding torque, 3.18 A/phase, series connection
Recommended Motors for STR8
  
OMHT23-603
€184,60
Beholdning: 3 uger 
 
NEMA 23 stepper motor, 354 oz-in holding torque, 5.0 A/phase, parallel connection
  
OMHT34-485
€424,84
Beholdning: 1 uge 
 
NEMA 34 stepper motor, 650 oz-in holding torque, 8.6 A/phase, parallel connection
  
OMHT34-486
€549,37
Beholdning: 5 uger 
 
NEMA 34 stepper motor, 1200 oz-in holding torque, 8.1 A/phase, parallel connection
  
OMHT34-487
€739,81
Beholdning: 1 uge 
 
NEMA 34 stepper motor, 1845 oz-in holding torque, 9.01 A/phase, parallel connection
  
OMHT34-504
€167,02
Beholdning: 5 uger 
 
NEMA 34 stepper motor, 396 oz-in holding torque, 6.3 A/phase, parallel connection
  
OMHT34-505
€230,01
Beholdning: 1 uge 
 
NEMA 34 stepper motor, 849 oz-in holding torque, 6.3 A/phase, parallel connection
  
OMHT34-506
€319,37
Beholdning: 1 uge 
 
NEMA 34 stepper motor, 1260 oz-in holding torque, 5.6 A/phase, parallel connection
All amounts shown in EUR
Ordering Example:  (1) STR4 Step/Direction stepper drive, 4A/phase, €304,46

Produkthåndbøger:

Download STR4 and STR8 Series - Stepper Motor Drives
Download STR2 Series - Stepper Motor Drives
We noticed you are from the US. Visit your local site for regional offers and live support.