Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

OMEGA-FLO® 2-way General Purpose Solenoid Valves
1/4 " to 1/2 " NPT

SV-330

OMEGA-FLO 2-way General Purpose Solenoid Valves 1/4

Se Alt Models Below

1 year warranty CE
  • Ideal for Compressed Air, Water and Other Fluids
  • Available in Brass or Stainless Steel
  • Process Temperature Range to 130°C
  • 120 Vac Coils
  • Normally Closed
Ventiler - Vis relaterede produkter

Beskrivelse

Follow this link if you want to know how a solenoid valve works.

SV-330 Series 2-way solenoid valves are direct-acting, featuring an epoxy-encapsulated coil, a brass or stainless steel body, and Viton® seal material. The -10 to 130°C temperature range is ideal for neutral media such as compressed air, water, oils, and greases without additives (viscosity of approximately 2.3 x 10-4 ft2/s). Electrical connection is by conduit plug.

SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Max Ambient Temp: 54°C
Voltage Tolerance: &#plusmn;10%
Power Consumption in Warm State:
    AC: 35 to 40 VA (inrush), 16 VA/10 W (hold)
    DC: 10 W
Opening Time:
    AC: 10 to 20 ms
    DC: 20 to 80 ms depending on orifice and pressure
Closing Time: 20 to 30 ms (AC and DC) Times measured at outlet A on energizing/ de-energizing until attainment of pressure rise to 90%/pressure drop to 10% at a working pressure of 85 psi.
Cycling Rate: Approx. 1000 cpm
Duty Cycle: Continuous (100%)

All amounts shown in DKK
Noter: Not all output options are available on all models.
Please consult Omega sales for available models.

Supplied with operator's manual.