USB-datafangstmodul til termokoblere med 8 kanaler

TC-08

^€531,34 TC-08

PLACE ORDER

Måling og registrering af op til 8 termokoblere på en PC
Windows-software til realtidsvisning og datalogning medfølger
Stort temperaturområde fra -270 til 1820° C
Kan anvendes med termokoblere type J, K, T, E, R, S, B og N
Op til 10 aflæsninger pr. sekund
Automatisk kompensation for cold-junction
Stor nøjagtighed og opløsning
USB-interface - kræver ikke strømforsyning
Flere enheder kan køre på én PC

USB-, RS232-, RS485- og Ethernet-systemer til datafangst - Vis relaterede produkter

Beskrivelse

The TC-08 thermocouple data acquisition module is designed to measure a wide range of temperatures using any thermocouple that terminates in a miniature size thermocouple plug. Additionally the TC-08 can also measure other sensors using a ±70 mV range. Featuring built-in cold junction compensation (CJC), the TC-08 has an effective measuring range of -270 to 1820°C (the actual temperature range depends on the thermocouple type being used).

The TC-08 can be used with thermocouple types J, K, T, E, R, S, B and N and outputs can be viewed in degrees F, C or mV. The unit is accurate to 0.2 percent ± 0.5 degrees C and has a resolution of better than 0.1 degrees C for most thermocouple types.

The TC-08 connects to the USB port of a Windows based PC and enables the host PC to automatically detect the TC-08 avoiding the need for any complex setup procedures. The USB connection also allows the TC-08 to be powered directly by the USB bus eliminating the need for an external power supply and making the TC-08 ideal for measuring temperatures both in the lab and in the field.

The TC-08’s USB connectivity allows up to 20 TC-08 USB data acquisition modules to be used simultaneously on one PC making the TC-08 ideal for use as a large multi-channel temperature acquisition system with a cost per channel significantly lower than other systems of this size. The low conversion time of the TC-08 means up to 10 temperature measurements can be taken every second, while the high (20 bit) resolution ensures that the TC-08 can detect minute changes in temperature. With the TC-08 thermocouple data acquisition module your measurements can be made both fast and accurately. Simply plug the TC-08 into a USB port on your computer, connect your thermocouples, and you are ready to measure temperatures.

Logging Software
With the included TC-08 Recorder software, you can configure multiple (USB) TC-08s, set the sampling interval from 0.1 seconds to several hours and set the maximum number of readings. You can also set what you want to do once the thermocouple readings have been taken - either: Stop; Repeat Immediately (start again); Scroll (oldest recordings disappear); or Repeat After Delay (where the delay is set by the user). Data can be viewed both during and after collection in spreadsheet or graphical format.

Software Drivers
For users who wish to write their own software a range of drivers and programming examples are included:
Drivers for Windows 98SE/ME/2000/XP. Programming Examples for C, Delphi, Visual Basic, Labview, Agilent VEE 6.1 and Microsoft Excel.

Specifications
Number of Channels: 8
Conversion Time: 100 ms (thermocouple
and cold junction compensation)
Temperature Accuracy: Sum of
±0.2% of reading and ±0.5°C
Voltage Accuracy: Sum of ±0.2%
of reading and ±10 µV
Overload Protection: ±30 V
Maximum Common Mode Voltage: ±7.5 V
Input Impedance: 2 M.
Input Range (Voltage): ±70 mV
Resolution: 20-bits
Noise Free Resolution: 16.25-bits
Thermocouple Types: B, E, J, K, N, R, S, T
Input Connectors: Miniature thermocouple
Output Connector: USB cable supplied 1.8 m (6')
PC Connection: USB 1.1
Power Supply: From USB port
Dimensions:
201 x 104 x 34 mm
Included Software: TC-08 Recorder and Player
PC REQUIREMENTS
Processor: Pentium class processor or equivalent
Memory: 32 MB minimum
Disk space: 10 MB minimum
Operating System: 32-bit edition of Microsoft Windows XP (SP2) or VISTA
Ports: USB 1.1 or USB 2.0 compliant port.
Must be connected direct to the port or a powered USB hub

Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.

Antal

Beskrivelse

TC-08

€531,34

Beholdning: På lager

8-channel thermocouple data acquisition module

† All amounts shown in EUR
Noter: Includes Windows software and drivers, USB cable, printed quick start guide and complete operator’s manual on CD.