Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Thermistor Temperature Transmitter
“Smart” in-head transmitter

TX206TH

Thermistor Temperature Transmitter
 | TX206TH

Thermistor Temperature Transmitter

84,17 TX206TH

5 year warranty
  • Supports Many Thermistor Types
  • 2-Wire, Loop Powered
  • 4 to 20 mA Output
  • PC Configurable Ranges (requires programmer)
  • High Stability
Termistorelementer, -prober og -enheder - Vis relaterede produkter

Beskrivelse

The TX206TH is a cost effective "smart" in head transmitter that accepts thermistor temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal.

A variety of thermistor types are available when using the configuration software: select thermistor type, temperature range, units and burnout direction, without requiring calibration equipment. PC configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the TX206TH loop terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use.

Alternatively, a single push button and LED indicator allows the user to configure transmitter range against a manually set input condition. A red LED is included to help guide the user. The LED also operates as a sensor error indicator.

Transmitters can be factory configured for any range specified at the time of order, removing the need for user configuration.

Specifications (at 20°C)

INPUT
Sensor Type:
Thermistor
Sensor Connection: Screw terminal
Minimum span: 5 °C
Accuracy (typical): ± 0.2 °C ±0.2 % of reading
Thermal Drift: ± 0.02 % / °C

OUTPUT
Output Type:
2 wire (4 to 20) mA current loop
Output range: (4.0 to 20.0) mA
Output Connection: Screw Terminal
Maximum output: 21.5 mA
Minimum output: <3.75 mA
Accuracy: (mA output /2000) or 5 µA (Whichever is the greater)
Loop Voltage effect: 0.2 µA / V
Thermal drift: ±2 µA / °C
Maximum output load: [(Vsupply-10)/21]K Ω;(Example: 666 Ω @ 24 V)

THERMISTOR TYPES
Please refer to configuration software for complete up to date list: 3KB (44005, 44030), 5KB (44007, 44034), 10KB (44016,44036) 10KH (44006, 44031), 30KH (44008), 2252KB (44004, 44033)

GENERAL SPECIFICATION
Response time:
1 second
Start-up time: 2 seconds ( I out < 4 mA during start up)
Warm-up time: 1 minute to full accuracy
Power Supply: (10 to 30) Volts dc

ENVIRONMENTAL
Ambient operating range:
(-40 to +85) °C
Ambient storage temperature: (-50 to +90) °C
Ambient humidity range: (10 to 90) % RH non condensing

PHYSICAL
Dimensions:
43 mm diameter; 21 mm height
Mounting: Two 5.5 mm Ø holes on 33 mm centres, will fit a DIN standard termination head.
Weight: 31 g (encapsulated)
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
TX206TH
84,17
Beholdning: 5 uger 
 
Thermistor temperature transmitter
TX206TH-UKFS
Kontakt salgsafdelingen    
Beholdning: 
 
 
Thermistor temperature transmitter, factory scaled for specific thermistor type and temperature range. (specify requirements in order comments)
USB-CONFIG-TH
€100,57
Beholdning: 5 uger 
 
USB Interface module (required for user scaling via PC/Software
All amounts shown in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.