Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Signalbetinger til montering på DIN-skinne. RTD, termokobler, resistans, mV, skydeindgange

TXDIN1600T

Intelligent signalbetinger
 | TXDIN1600T

Intelligent signalbetinger

Se Alt Models Below

  • 3-vejsisolation
  • Udgange på 4-20 mA, 0-20 mA, 0-10 V eller -10 til +10 VDC
  • 10-48 VDC- eller 10-32 VAC-strømforsyning
  • Justerbart indgangfilter 0-100 sek.
  • USB-opsætning, gratis konfigurationssoftware medfølger
Procesmåling og instrumenter til styring - Vis relaterede produkter

Beskrivelse

The TXDIN1600T DIN Rail Transmitter is designed for all common thermocouples (13 types) and resistive temperature detectors in the range of 10 to 10k5 Ω. The 3-way galvanic isolation allows for a number of transmitters to be powered from the same power supply and enables the use of non-isolated thermocouples for fast temperature response, or thermocouples which are at a high voltage potential.

The flexible output circuit has voltage, bipolar voltage or mA signals, allowing simple, direct wiring to controllers, indicators, PLCs or PC-measuring systems.

22 point user linearisation is available for slide-wire, mV or linear resistance inputs and the output signal is fully scalable. A 0-100s digital filter is also available, making the TXDIN1600T suitable for many different measurement applications.

The mini Type-B USB socket allows direct connection to a suitable PC for quick and easy configuration using the free software.

Specifications

 

Thermocouple/mV

Type

Range

Standard

Accuracy at 20°C

Basic Accuracy

Thermal Drift

J (Fe-CuNi)

-100 to +1200°C

IEC 584: 1998-06

< ±0.5°C, ±0.1% FS

Offset 0.1°C/°C,

Span 0.05°C/°C

K (NiCr-Ni)

-200 to +1370°C

L (Fe-CuNi)

-100 to +600°C

DIN 43760: 1985-12

E (NiC-Cu)

-200 to +1000°C

IEC 584: 1998-06

T (Cu-CuNi)

-200 to +400°C

< ±0.5°C, ±0.2% FS

N (NiCrSi-NiSi)

-180 to +1300°C

< ±0.5°C, ±0.1% FS

U (Cu-CuNi)

0 to +600°C

DIN 43760: 1985-12

R (PtRh-Pt)

0 to +1760°C

IEC 584: 1998-06

S (PtRh-Pt)

0 to +1760°C

B (PtRh-Pt)

0 to +1800°C

C

0 to +2300°C

ASTM E988

D

G

mV

-100 to 200 mV

 

± 0.02% of full scale

 

Cold Junction Range: -40 to +85°C; Accuracy: ±0.2°C; Drift: ±0.05°C/°C

RTD and Resistance

Type

Range

Standard

Curve

Accuracy at 20°C

Pt100

-200 to 850°C

DIN EN 60751: 1996

α = 0.00385

< ±0.2°C, ±0.05% Reading

Pt500

-200 to 750°C

Pt1000

-200 to 600°C

JPt100

-200 to 630°C

JIS C 1606: 1989

α = 0.003916

Cu100

-80 to 260°C

 

α = 0.00427

Cu1000

-80 to 260°C

   

Ni100

-60 to 180°C

DIN 43760: 1987

α = 0.00618

Ni120

-80 to 260°C

α = 0.00672

Ni1000

-50 to 150°C

 

Tk5000

Ni507.5

-80 to 360°C

   

Ni604

-200 to 200°C

   

Cu53

-50 to 180°C

   

Silicon sensor

-55 to 175°C

KTY81-110 -120-121-122-150-210-220-221-222-250

KTY82-110 -120-121-122-150-210-220-221-222-250

KTY81-151

KTY82-151

KTY83-210-220-250-121-122

-40 to 300°C 

KTY84-130-150

 
Potentiometer and Slide-wire

Sensor

Range 

Accuracy

Thermal Drift

Potentiometer

1 to 100 kΩ

0.1%

 

Slide-wire

10 to 500 Ω

± 0.055 Ω

0.013 Ω/°C

500 to 2500 Ω

± 0.5 Ω

0.063 Ω/°C

2500 to 10500 Ω

± 10 Ω

0.27 Ω/°C

Measuring Current: < 200 μA
Max. Lead Resistance: 20 Ω per leg; Effect: 0.002°C/Ω

Output Current
Current Source: Range (0 to 21.5) mA , Max. Load 750 Ω
Current Sink:
Range (0 to 21.5) mA , Supply (10 to 30) V dc, Voltage effect 0.2 uA/V
Accuracy: (mA Out/ 2000) or 5 uA whichever is the greater, Drift 1 uA/°C

Output Voltage
Range: (0 to 10.1) V or (-10.1 to 10.1) V, Accuracy ± 5 mV
Current Drive: ± 2 mA, Min. load 5000 Ω @ 10 V

Power Supply
Range: (10 to 48) Vdc, (10 to 32) Vac
Protection:
Internal 500 mA resettable fuse
Power:
< 1W Full Power

General
Response time: Start up 5 seconds, Update 300 mS, Response 400 mS, Warm up 2 minutes.
Galvanic Isolation: Supply to input to output 500 V dc.
LED Indication (STATE):
LED, Green when output (-0.1 to 100.1) %, else red LED, Red = input / output error

User Interface
Type: USB 2.0
Equipment:
PC running windows XP or later, USB cable.

 

User Interface Functions
Scaling: User signal to process value scaling, for simplified setup.
Filter: Adjustable time constant (0 to 100) Seconds.
User Linearisation (Profile): (2 to 22) segments Ω (slide wire) and mV to process.
Process Units: 4 Characters (signal input only)
Temperature units: °C or °F (TC, RTD inputs only)
Tag Number: 20 Characters
Process Output: Range in process units
Signal Output: Select type, signal range and (temperature only) error signal.
User offset: Enter sensor offset (Temperature mode only).
Active scaling: Set output process range against active sensor input

 

Environment
Operating Ambient: (-30 to 70) °C; (10 to 90) %RH (non-condensing)
Storage Ambient: (-30 to 70) °C; (10 to 90) %RH (non-condensing)
Configuration Ambient: (10 to 30) °C
Installation Enclosure: DIN Rail enclosure offering Protection >= IP65.

Approvals
CE: BS EN 61326


Mechanical
Style: DIN 43880
Colour: grey
Material: Polymide 6.6
Dimensions: width 17.5 mm; height 90 mm; depth 56.4 mm
Weight: < 70 grams
Terminals: 2.5 mm Maximum

 

 

Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
TXDIN1600T
150,61
Beholdning: 5 uger 
 
DIN Rail Mount Transmitter
TXDIN1600T-UKFS
Kontakt salgsafdelingen    
Beholdning: 
 
 
DIN Rail Mount Transmitter scaled for specific input/output requirements (please specify in order comments)
UWTC-CABLE
17,87
Beholdning: 7 uger 
 
USB Interface cable (required for connection to PC) mini Type B plug to Type A plug.
All amounts shown in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.