Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

OMEGATHERM™ pasta med høj varmeledningsevne til høje temperaturer

OT-201-1/2, OT-201-2, OT-201-16, OT-201-32

OMEGATHERM™ pasta med høj varmeledningsevne til høje temperaturer | OT-201-1/2, OT-201-2, OT-201-16, OT-201-32

Se Alt Models Below

  • Kontinuerlig temperatur op til 200° C
  • Særdeles høj varmeledningsevne
  • Klæber til de fleste overflader
Tilbehør - Vis relaterede produkter

Beskrivelse

OMEGATHERM™ thermal conducting paste is a high temperature and high thermally conductive paste product. They are specially formulated for permanent and temporary bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces–metals, ceramics, glass, plastics, paper products.

OMEGATHERM™ 201 — is a very high thermally conductive filled silicone paste, ideally suited for many temperature measurement applications. This thick, grey, smooth paste wets most surfaces and will not harden on long exposure to elevated temperatures. It is rated for continuous use between -40 and 200°C (–40 and 392°F).

OMEGATHERM™ 201 provides an excellent means of conducting heat and expanding the heat-path area from a surface to a temperature measurement sensor, thus increasing the speed of response and improving accuracy. Some applications are:
a) Surface Measurement Probes — dab a small amount on the surface and push the sensor into this area.
b) Temporary bonding and encapsulating of temperature sensors — simply dab OMEGATHERM™ 201 onto the surface or in the cavity, plant the sensor in the paste, and tape to hold in place.

This highly versatile paste is supplied in 14g and 56g jars, as well as in 450g and 900g containers.

Model No. OT-201
Material Silicone
Grease
Continuous
Temperature
200°C
(392°F)
Cure Not
required
Adheres to
Most*
Wets most
Surfaces
Thermal conductivity
(k)(BTU)in)/(hr)(ft 2) (°F)
Extremely High
16
Electrical Insulation
Volume Resistivity
ohm–cm
Very High
1014
*M=Metal   PA=Paper Products  C=Ceramic   W=Wood   PL=Plastic
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
Click to expand/minimize a list of what others bought with theOT-201-1/2
OT-201-1/2
Kontakt salgsafdelingen    
Beholdning: 
 
 
HIGH TEMP. CONDUCTIVE PASTE, one 14g Jar
  
OT-201-32
Kontakt salgsafdelingen    
Beholdning: 
 
 
HIGH TEMP & CONDUCTIVE PASTE, Two 450g Kits
All amounts shown in EUR
Ordering Example: (1) OT-201-16 High Temperature Conductive Paste, 450g., €197,10
We noticed you are from the US. Visit your local site for regional offers and live support.