Vibrationstestede termistorprober med M12-stik

TH-21 Series

Se Alt Models Below

PLACE ORDER

Maksimal kontinuerlig brug, 200° C
[Brug i en kort periode op til 250° C] til føleende,
85°C (185°F) Max at the Connector
Vibration Tested to ASTM-E1137: 3G fra 5 til 500 Hz
Særdeles god stabilitet over længere perioder
Tolerance: ±0,2° C fra 0 til 70° C
Fås i resistanserne 2252, 3K, 5K og 10K Ω ved 25° C

Termistorelementer, -prober og -enheder - Vis relaterede produkter

Beskrivelse

The TH-21 Series thermistor probes are constructed with the 55000 Series glass encapsulated thermistor elements which provide excellent stability and accuracy. With a maximum continuous temperature rating of -80 to 200°C (-112 to 392°F), and intermittent operation to 250°C (482°F), these thermistor sensors can be used in applications previously out of reach of epoxy coated thermistor sensors. The probes can be ordered in any length but we highly recommend a minimum immersion depth of 1.5". Short probes run the risk of error due to stem conduction effects.

Specifications
Temperature Range: -50 to 200°C (-58 to 392°F) at Sensing End
Probe Connector Temperature: 85°C (185°F) Max
Thermistor Sensor: Refer to Table 1 on next page
Operating Current: 12 micro-amps
Insulation Resistance: 100 MΩ minimum at 100 Vdc at ambient temperature
Response Time: Approximately 7 seconds (50%), 8 seconds (63.2%), 14 seconds (90%) in water flowing at 0.91 m (3') per second
External Materials: 316L stainless steel sheath and housing except connector insert
IP Rating: IP67 with mating connector installed

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

Standard 2252 Ω Thermistor

TH-21A-2252-1/4-0600-M12

€106,64

Beholdning: 7 uger

Straight sheath, 1/4' diameter, 6' long, M12 male connector

TH-21B-2252-1/4-0600-M12

€106,64

Beholdning: 7 uger

Straight sheath with 1/2 NPT mounting, 1/4' diameter, 6' long, M12 male connector

TH-21C-2252-1/4-0600-M12

€106,64

Beholdning: 7 uger

Straight sheath with 3/8 NPT mounting, 1/4' diameter, 6' long, M12 male connector

TH-21D-2252-1/4-0600-M12

€106,64

Beholdning: 7 uger

Straight sheath with 1/4 NPT mounting, 1/4' diameter, 6' long, M12 male connector

10K Ω Thermistor

TH-21A-10K-1/4-0600-M12

€106,64

Beholdning: 7 uger

Straight sheath, 1/4' diameter, 6' long, M12 male connector

TH-21B-10K-1/4-0600-M12

€106,64

Beholdning: 7 uger

Straight sheath with 1/2 NPT mounting, 1/4' diameter, 6' long, M12 male connector

† All amounts shown in EUR
Noter: For lengths other than 6", change “-0600” in model number to required length and add $1 per inch greater than 6", (example: 9" = 0900, 41/2" = 0450).
For 1/8" probe diameters, change “-1/4” in model number to “-1/8”, no additional cost.
For 3K, 5K or 10K Ohm thermistor elements change “-2252” to desired resistance.
•For Dual element probes, add "-DUAL" to the end of the Model Number and multiply the price by 1.75

Delnummerberegner

Build Your Part Number Below

		(1)			(2)		(3)		(4)
TH	-21		-2252	-		-		-M12

Beskrivelse af tilvalg:

(1) Design select from:
A for Plain no thread
B for 1/2 NPT mounting thread
C for 3/8 NPT Mounting thread
D for 1/4 NPT Mounting thread
E for M8x1 Mounting thread
F for M10x1 Mounting thread
G for G1/2 mounting thread
H for G1/4 mounting thread

(2) Diameter select from:
1/4 for 1/4 in diameter
M6 for 6 mm diameter

(3) Probe Length select from:
0600 for 6 in
0150 for 150 mm

(4) Additional Option select from:
Nothing(leave field blank) for None
-DUAL for Dual element version

Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.