Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Click on this link if you need more information about Thermistor elements.
The TH-22 Series thermistor probes are constructed
with the 55000 Series glass encapsulated
thermistor elements which provide excellent
stability and accuracy. The connector design includes
an LCP insert with nickel plated copper pins for high
temperature applications, 200°C (392°F).
With a maximum continuous temperature rating of
-80 to 200°C (-112 to 392°F), and intermittent
operation to 250°C (482°F), these thermistor
sensors can be used in applications previously
out of reach of epoxy coated thermistor sensors.
The probes can be ordered in any length but we
highly recommend a minimum immersion depth
of 1.5". Short probes run the risk of error due
to stem conduction effects.
Specifications Temperature Range: -50 to 200°C (-58 to 392°F) Thermistor Sensor: Refer to Table 1 on next page Operating Current: 12 micro-amps Insulation Resistance: 100 MΩ minimum at 100 Vdc at ambient temperature Response Time: Approximately 7 seconds (50%), 8 seconds (63.2%), 14 seconds (90%) in water flowing at 0.91 m (3') per second External Materials: 316L stainless steel sheath and housing except connector insert IP Rating: IP67 with mating connector installed
† All amounts shown in EUR Noter: For lengths other than 6", change “-0600” in model number to required length and add additional cost per inch greater than 6", (example: 9" = 0900, 41/2" = 0450). For 1/8" probe diameters, change “-1/4” in model number to “-1/8”, no additional cost. For 3K, 5K or 10K O thermistor elements change “-2252” to desired resistance. For dual element 1/4" or 6 mm diameter versions, add “-DUAL” to the end of the model number (not available in 1/8" or 3 mm diameter probes), for an additional cost.
Delnummerberegner
Build Your Part Number Below
Beskrivelse af tilvalg:
(1)
Mounting Thread select from: A for None B for 1/2 NPT C for 3/8 NPT D for 1/4 NPT E for M8x1 F for M10x1 G for G1/2 BSPP H for G1/4 BSPP
(2)
Resistance select from: 2252 for 2252 Ohm 3000 for 3000 Ohm 5000 for 5000 Ohm 10000 for 10000 Ohm
(3)
Diameter select from: 1/4 for 1/4 Inch M6 for 6 mm
(4)
Length (Custom lengths available) select from: 0600 for 6 Inch 0150 for 150 mm
(5)
Dual Element select from: Nothing(leave field blank) for Standard -DUAL for Dual Element
Noter: Ikke alle kombinationer er nødvendigvis gyldige. Se specifikationerne for gyldige delnumre.