Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Parallel Pneumatic Grippers Miniature Series for Clean Room Applications

RPMC Series - Mini Parallel 2-Jaw Clean Room Gripper

Clean room gripper | RPMC Series - Mini Parallel 2-Jaw Clean Room Gripper

Clean room gripper

759,03 RPMC-1M

  • Pneumatic Parallel Mini Gripper Available in 3 Stroke Lengths
  • Precision Gripper—Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
  • Clean Room Grease and Corrosion Resistant Shields Allow for Use in Clean Room and Harsh Environments
  • Rated Grip Force @ 7 Bar, 36 N
  • Gripper Accuracy of 0.05 mm and Repeatability of 0.03 mm
  • Rigid and Low Friction Design Allows for Longer Finger Lengths for Use on Delicate Parts
  • Group Multiple Grippers in Close Array Using Top Manifold Mounting Surface
  • Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
  • Operating Temperature -35 to 80°C
  • System Requires 3 to 7 bar Dry Filtered (40 Micron or Better) Air Supply
  • Requires 4-Way, 2 Position Valve and Regulator for Delicate Parts
Bevægelse - Vis relaterede produkter


More information about how a pneumatic gripper works in this link.

RPMC Series Gripper is a miniature pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. RPMC Pneumatic Grippers are top mounted and have air ports on the side or top for manifold mounting to keep the air line away from the grip area. These grippers are available in stroke lengths from 3.2 to 6.3mm with a gripper force of 36 N.

RPMC Grippers are Clean Room and Harsh Environment rated with a corrosion resistant shield to protect the drive and bearing mechanism from chips and other contaminants. All internal components are lubricated with clean room grade lubricant and the scavenger port can be used with vacuum to prevent escapement of particulate. It can also be used with pressure to repel particulate away from the gripper jaws. This pneumatic gripper is designed for class 10 clean room, FDA, and medical applications.

Pneumatic linear motion components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device.

Pneumatic Specifications
Pressure Operating Range: 3 to 7 bar (40 to 100 psi)
Cylinder Type: Double acting
Dynamic Seals: Internally lubricated Buna-N
Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
Air Filtration: 40 micron or better
Air Lubrication: Not necessary*
Air Humidity: Low moisture content (dry)
Temperature Operating Range
Buna-N Seals (Standard): -35 to 80°C
FKM Seals (Optional): -30 to 120°C
Maintenance Specifications
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
*Addition of lubrication will greatly increase service life.

Specifications RPMC-1M RPMC-2M RPMC-3M
Total Rated Grip Force
F @ 7 bar
36 N
Stroke 3.2 mm 4.8 mm 6.3 mm
Weight 0.024 Kg 0.026 Kg 0.034 Kg
Pressure Range 3 to 7 bar
Cylinder Bore Ø 10 mm
Displacement 0.13 cm3 0.20 cm3 0.25 cm3
Temp Range(Standard Seals) -35 to 80°C
Temp Range(FKM Seals) -30 to 120°C
Actuation 0.10 sec
Accuracy ±0.05 mm
Repeatability ±0.03 mm
Valve Required to Actuate 4-way, 2-position
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Beholdning: 17 uger 
Pneumatic Gripper with Maximum Stroke of 3.2mm
Beholdning: 13 uger 
Pneumatic Gripper with Maximum Stroke of 4.8mm
Beholdning: 13 uger 
Pneumatic Gripper with Maximum Stroke of 6.3mm
Beholdning: 1 uge 
Standard seal repair kit
Beholdning: 13 uger 
Top air port manifold seal kit (FKM only)
Beholdning: 1 uge 
Mini-swivel elbow air fitting, 3M thread and 4mm tubing barb
All amounts shown in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.