Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

Drum Immersion Heaters for High Viscosity Solutions and Adjustable Stainless Steel Mounting Bracket

TAT3

Drum Immersion Heaters for High Viscosity Solutions and Adjustable Stainless Steel Mounting Bracket | TAT3

Se Alt Models Below

  • Fits Through the Standard 51 mm (2") Bung Opening in 55 Gallon Drums
  • Ideal for Improving the Flow of Lard, Tar, Oils and Other High Viscosity Solutions
  • Double Pole 16 to 121ºC (60 to 250°F) Thermostat with Over- Temperature Cutout and Pilot Lamp to Indicate Heater On/Off Status
  • Only 203 mm (8") of Vertical Riser is Heated, Allowing Liquid Level to Fluctuate without Damaging the Heater
  • Adjustable Stainless Steel Mounting Bracket
Dykvarmeaggregater - Vis relaterede produkter

Beskrivelse

Click on this link if you need more information about a Immersion Heater or general information about industrial heater elements.

Installation, Operation and Maintenance Instructions
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage

Model No. Sheath Watt Density Watts Volts A B
watt/in2 watt/cm2 mm inch mm inch
TAT30003 Copper 8 1.2 1000 120 914 36 483 19
TAT30004 32 5.0 4000 240
TAT30002 Stainless Steel 8 1.2 1000 120 914 36 483 19
TAT30001 32 5.0 4000 240
TAT30005 Steel 8 1.2 1000 120 914 36 483 19
TAT30006 32 5.0 4000 240
Note: This style heater can be manufactured with “A” and “B” dimensions suitable for other applications. Consult Omega with your requirements.
Ordering Example: TAT30003, 1000 watts, 120 Vac immersion heater.
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Copper Sheath
Quick Ship
TAT30003
Kontakt salgsafdelingen    
Beholdning: 
 
 
Sheath; Copper, 1000 Watts, 120 Volts, 36 Inches High x 19 Inches Long
Quick Ship
TAT30004
DKK4.630,00
Beholdning: 7 uger 
 
Sheath; Copper, 4000 Watts, 240 Volts, 36 Inches High x 19 Inches Long
Stainless Steel Sheath
Quick Ship
TAT30002
DKK4.380,00
Beholdning: 7 uger 
 
Sheath; Stainless Steel, 1000 Watts, 120 Volts, 36 Inches High x 19 Inches Long
Quick Ship
TAT30001
DKK4.380,00
Beholdning: 7 uger 
 
Sheath; Stainless Steel, 4000 Watts, 240 Volts, 36 Inches High x 19 Inches Long
Steel Sheath
Quick Ship
TAT30005
Kontakt salgsafdelingen    
Beholdning: 
 
 
Sheath; Steel, 1000 Watts, 120 Volts, 36 Inches High x 19 Inches Long
Quick Ship
TAT30006
DKK4.170,00
Beholdning: 7 uger 
 
Sheath; Steel, 4000 Watts, 240 Volts, 36 Inches High x 19 Inches Long

Bestil efter Vare nummer

Vare nummer
Antal 
Vare nummer
Antal 


All amounts shown in DKK
Noter: Note: This style heater can be manufactured with “A” and “B” dimensions suitable for other applications. Consult Omega with your requirements.