Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Ring til
os
Kurv  |  Kontakt  | 
80 25 14 43  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Wireless pH and Temperature Transmitter
These products are not CE marked and use a frequency band which is not approved for use in Europe

OM-CP-RFPH101A

Wireless pH and Temperature Transmitter  These products are not CE marked and use a frequency band which is not approved for use in Europe | OM-CP-RFPH101A

Se Alt Models Below

PLACE ORDER
5 year warranty
  • Multiple Transmitter Configurations
  • Works with OMEGA ® PHE-4200 Series of pH Probes
  • Real-Time Operation
  • Automatic Temperature Compensation
  • Automatically Converts Your PC into a Strip Chart Recorder

Beskrivelse

The OM-CP-RFPH101A is a miniature, wireless, battery powered, stand-alone, pH and temperature transmitter. This all-in-one compact, portable, easy to use device will measure and transmit pH and temperature measurements. When enabled, the wireless transmitter will transmit readings back to the host computer where the data can be analyzed in real time. These readings are also logged to the device’s memory for added data security. The convenient slide switch allows the transmitter to be turned On or Off without affecting the operation of the device. The OM-CP-RFPH101A is a major leap forward in both size and performance. Numerous devices may transmit data to the same receiving station. The Windows software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can also be exported to a text or Microsoft Excel file.

Specifications:
TEMPERATURE CHANNEL
Temperature Sensor: a pH electrode with integral 100Ω Pt RTD temperature sensor or an external 100Ω Pt RTD temperature sensor is required (a 100Ω resistor may be used if temperature compensation is not needed)
Measurement Range:
-200 to 850°C (-328 to 1562°F)
Temperature Resolution:
0.01°C (0.001)
Calibrated Accuracy:
+0.1°C @25°C ambient (+0.015)
Input Connection:
screw-terminal; 2, 3 or 4 wire

pH CHANNEL
pH Range:
0.00 to 14.00 pH
(-1000 to +1000 mV)
pH Resolution: 0.01 pH (0.1 mV)
Calibrated Accuracy:
+0.1pH (+1 mV)
Input Connection: female BNC jack
Input Resistance: 10 12.typical

GENERAL SPECIFICATIONS
Start Time: software programmable
start time and date, up to six months in advance
Real Time Recording: may be used with PC
to monitor and record data in real time
Memory: 13107 readings per channel
Reading Interval:
1 reading every 30 seconds to 1 every 12 hours
Calibration: digital calibration through software
Data Format: date and time stamped,
°C, °F, °K, °R, pH, V, mv,
engineering units specified through software
Time Accuracy: +1 minute/month at
20°C when RS232 port is not in use
Computer Interface: PC serial or RS-232C COM
interface cable required); 57600 baud
RF Baud Rate: 4800 baud
RF Carrier Frequency: 418 MHz
Range: 36.6 m (120') line of sight
Power: 9 V lithium battery included
Battery Life: 1 year typical
(1 minute reading rate @ 25°C)
Weight: 113 g (4 oz)
Software: Windows 95/98/NT/2000/XP
Operating Environment:
-5 to +50°C (23 to122°F)
5 to 95% RH non-condensing
Dimensions:
114 H x 61 W x 25 mmD
(4.5 x 2.4 x 1.0")
Weight: (120 g) 4 oz
These products are not CE marked and use a frequency band which is not approved for use in Europe
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
Beskrivelse
  
OM-CP-RFPH101A
Kontakt salgsafdelingen    
Beholdning: 
 
 
Wireless pH and temperature transmitter
Click to expand/minimize a list of what others bought with theOM-CP-RFC101A
OM-CP-RFC101A
Kontakt salgsafdelingen    
Beholdning: 
 
 
Windows software and 1.2 m (4') RS-232 cable termination and receiving antenna
Click to expand/minimize a list of what others bought with theOM-CP-BAT103
OM-CP-BAT103
€42,51
Beholdning: 1 uge 
 
Replacement 9 V lithium battery
  
OM-CP-CONNECTOR-4
€14,01
Beholdning: 1 uge 
 
Replacement 4 position terminal block conector
† All amounts shown in EUR
 Noter: Operator's manual, battery, RS-232 cable, and receiving antenna are included with the OM-CP-RFC101A Windows software (software is required to operate the data logger and is sold separately). (NIST calibration for temperature only).
These products are not CE marked and use a frequency band which is not approved for use in Europe

Produkthåndbøger:

Download OM-CP Series - Data Logger and Software User Guide
Download OM-CP Series - Data Logger Quickstart Guide
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >