Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Click on this link if you need more information about an accelerometer.
OMEGA’s model ACC301A triaxial accelerometer is ideal for lightweight single-point monitoring of vibration in three (X-Y-Z) planes. This accelerometer has a very low noise floor and a wide frequency range of up to 10 kHz at 3db. The ACC301A accelerometer weighs only 13.6 grams, yet its titanium construction makes it very rugged.
SPECIFICATIONS Excitation: 2 mA nominal @ 15 to 30 Vdc, 1 to 6 mA max constant current Sensitivity @ 100 Hz, ±5%: 10 mV/g - 1.02 mV/(m/s²) Frequency Range ±5%: 3 Hz to 7 kHz Frequency Range ±10%: 2 Hz to 8 kHz Frequency Range ±3db: 1 Hz to 10 kHz Turn on Time (2% of final bias): <5 Seconds Amplitude Range @22°C: ±500g Mounted Resonance:>25 khz Transverse Sensitivity:<5% Temperature Range: -40 to 121°C Base Strain: 0.0005 g peak/ustrain Shock Limit: 5,000 g Noise Broadband 2.5 Hz to 25 kHz: 1500 u (rms) Noise Spectral 10 Hz: 100 ug/sqrt Hz (rms) Noise Spectral 100 Hz: 25 ug/sqrt Hz (rms) Noise Spectral 1000 Hz: 10 ug/sqrt Hz (rms) Output Impedance: 1000 Ω Isolation:Isolated, >100 Meg Ω Noise Rejection (EMI/RFI):>52 db Bias Voltage: 7 Vdc Weight: 13.6 grams nominal (without cable) Case Material: Titanium Design: Isolated Compression Environmental Seal: Splashproof epoxy Dimensions: 21 x 21 w x 28 mm d Connector: Side 4-pin, ¼-28 female termination, cable sold separately (order Model No. ACC-CB3-6) Mounting: 10-32 removable stud Mounting Torque Max: 2.2 N-m (20 in-lb)
† All amounts shown in EUR Ordering Example: (1) ACC-CB3-6 Cable for connecting accelerometer to PSU, €351,07 plus (1) ACC-PS4A-230VAC Power Supply, €964,31 , €351,07 + 964,31 = €1.315,38