Vortex Flowmeters For Liquids Only with Flows As Low As 0.6 GPM - Discontinued

FV-600 Series Discontinued

Se Alt Models Below

PLACE ORDER

Standard 4 to 20 mA Output for Use with DPF60 Batch and Ratemeters
All-Plastic Wetted Parts – Excellent for Use with Low Viscosity Corrosives and Ultra-Pure Liquids
Modular Components Easily Replaced in the Field
Male NPT Connected –Threads Directly In-Line

Beskrivelse

The FV-600 Series has been discontinued. Please see the FV-200 Series as a possible substitute or contact our Flow and Environmental department.

OMEGA’s FV-600 and FV-500 Series vortex flow meters operate on the same field-proven vortex shedding principle. The FV-600 vortex flowmeter can operate on liquids with up to 6 centistoke viscosity; however, the minimum measureable flowrate rises to 50% of max. span. The 4 to 20 mA output is suitable for use with the DPF60 series meter, (see link below), as well as with OMEGA’s chart recorders and computer interfaces.

Til bestilling(Angiv modelnummer)

Vare nummer/Desc.

Antal

Beskrivelse

FV-602

Kontakt salgsafdelingen

Beholdning:

1/4 " NPT, 0.6 min gpm, 5gpm max*, 20 psi max pressure drop, 0.68 kg(1.5 lbs) 133mm (5.25")

FV-620

Kontakt salgsafdelingen

Beholdning:

2" NPT, 16.7 min gpm, 200 gpm max*, 6 psi max pressure drop1.23 kg (2.7lbs) 213 mm(8.38")

† All amounts shown in EUR
Noter: *Max span GPM = 20 mA; this can be adjusted with field calibration, which can be performed with a frequency source.