Cookies på Omegas websteder Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt. Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
The OM-CP-TSR101 series has been discontinued. Please see the OM-CP-SHOCK-SERIES as a possible alternative or contact our Sales department.
The OM-CP-TSR101 is a battery powered, stand alone 3-axis shock
data logger. The OM-CP-TSR101 measures and records
instantaneous shock levels when the user-selectable shock levels
have been exceeded. There are 15 rates to chose from ranging
from 1024 to 1 Hz.
The OM-CP-TSR101 is valuable in characterizing environments
such as packaging and fragility assessment (drop testing), break
and crash testing, and shipping validation. This is an all-in-one
compact, portable, easy to use device that will measure and
record approximately 349,000 measurements per axis.
The storage medium is non-volatile solid state memory, providing
maximum data security even if the battery becomes discharged.
The device can be started and stopped directly from your computer
and its small size allows it to fit almost anywhere.
The OM-CP-TSR101 makes data retrieval quick and easy. Simply
plug it into an empty COM or USB port and our user-friendly software
does the rest.
Channels: Shock (3-axis) Acceleration Type: MEMS semiconductor Reading Rate Range: 15 options from 0.976 ms/1024 Hz
to 1 second, selectable in software Trigger Specifics: User settable trigger levels on X, Y, and/or Z
axis, and specifies # of samples after triggers Pre-Trigger Specifics: Records a pre-trigger of up to 50 readings
prior to the trigger point Frequency Response: 0 Hz to approx. 400 Hz (50, 100 g)
[0 to 512 Hz (5 g)] Real Time Recording: May be used with PC to monitor and
record instantaneous acceleration in real time (only at 1 second rate,
not possible during logging) Start Modes: Software programmable, immediate start
or delay start up to 180 days in advance Password Protection: An optional
password may be programmed into the device to restrict access to
configuration options. Data may be read out without the password Calibration: Digital calibration through software Calibration Date: Automatically recorded within device Power: 9 V lithium or alkaline battery (included), user replaceable Battery Life: 7 days typical with lithium battery, immediate start,
1024 Hz Data Format: Date and time stamped, G and mG Time Accuracy: ±1 minute per month at 20 to 30°C Computer Interface: USB or serial interface (cable required)
115,200 baud Software: Operating Environment: -20 to 60°C (-4 to 140°F)
0 to 95% RH non-condensing Dimensions: 89 H x 112 W x 26 mm D (3.5 x 4.4 x 1.0") Weight: 340 g (12 oz) Material: Anodized aluminum
† All amounts shown in EUR Noter: Comes with complete operator’s manual and 9V lithium battery. The OM-CP-IFC110 Windows software includes RS-232 cable required to operate the data logger (software sold separately).