Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

2-Channel Dynamic Signal-Input Card for OMB-DAQBOARD-2000 Series and OMB-LOGBOOK

OMB-DBK4

2-Channel Dynamic Signal-Input Card for OMB-DAQBOARD-2000 Series and OMB-LOGBOOK | OMB-DBK4

Se Alt Models Below

1 year warranty CE
  • Offers a Per-Channel Programmable Gain Amplifier for ±50 mV, ±500 mV, or ±5 V FS Input
  • Includes a Built-In Current Source for ICP Transducer Biasing
  • Offers Per-Channel Anti-Aliasing Filters
  • Provides Per-Channel Simultaneous Sample and Hold
  • Accommodates Either AC or DC Coupled Signals
  • Both Dynamic Analog Inputs Sampled Within 50 ns of Each Other
Signalindlæringsenheder - Vis relaterede produkter

Beskrivelse

The 2-channel OMB-DBK4 dynamic signal-input card enables OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems to accommodate inputs from piezoelectric transducers, such as accelerometers or microphones, as well as from various other dynamic signal sources. Each OMB-DBK4 card is equipped with two BNC connectors and footprints for two user-installed Microdot connectors, permitting it to easily accommodate most transducer connections.

Architecture
The OMB-DBK4 provides per-channel, constant current source outputs, programmable gain amplifiers, programmable anti-aliasing filters, and sample and hold amplifiers.

Specifications
Channels:
2
Connectors: DB37 male, 1 BNC per channel, and footprints for one
user-provided Microdot connector per channel
Current Source:
Output Impedance: >1.4 M .
Compliance: 27 V
Current Levels: 2 and 4 mA (jumper selectable)
Input Impedance: 150 K .
Input Ranges: ±50 mV, ±500 mV, and ±5 V FS;
additional full scale ranges are available
when combined with the OMB-LOGBOOK’s
or OMB-DAQBOARD-2000 Series
on-board programmable A/D ranges
Coupling: AC and DC
AC High-Pass Filters: Per-channel,
1-pole HPF with 10 Hz or 0.1 Hz cutoff,
selectable via jumper
Input Signal/Noise: >96 dB (BW=100 kHz)
Amplitude Accuracy: ±0.5 dB passband center
Low-Pass Filter: Software selectable, 12-pole Butterworth filter,
with cutoff frequencies of 18 kHz, 9 kHz, 4.5 kHz, 2.25 kHz,
1.125 kHz, 562.5 Hz, 281.2 Hz, and 141.6 Hz;
each channel can be configured for a different cutoff frequency
Power Consumption: 2750 mW (When multiple OMB-DBK4 cards
are used, an OMB-DBK32A
auxiliary power supply may be required.)
Cables: Use OMB-CA-37-x cable with OMB-LOGBOOK
and OMB-DAQBOARD-2000 Series
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
OMB-DBK4
Kontakt salgsafdelingen    
Beholdning: 
 
 
2-Channel Dynamic Signal-Input Card
All amounts shown in EUR
We noticed you are from the US. Visit your local site for regional offers and live support.