Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

  Discontinued - Tryktransducere til neddykning

PXM709GW Series

Tryktransducere til neddykning | PXM709GW Series

Tryktransducere til neddykning

Se Alt Models Below

  • As an alternative see the PXM709GW series and PX633 series
  • Præcis mikroforarbejdet siliciumsensor
  • 5-punkts NIST-sporbar kalibrering
  • Beskyttelse mod lynnedslag/strømspids fås på forstærkede modeller
  • Kabinet og membran i 316L SS
  • Samlet polyurethankabel
  • Førsteklasses temperaturydeevne
  • Stort kompenseret temperaturområde
  • Standardnøjagtighed 0,20 % eller modeller med høj nøjagtighed på 0,08 % til præcis dybdemåling som ekstraudstyr
  • Fås i målertryk: Udluftes til atmosfæren via kablet
  • Forseglet måler: Udluftes ikke til atmosfæren
  • eller absolut tryk: Vakuumreference
  • Beskyttet mod omvendt polaritet
  • Beskyttende næsekegle og tørremiddel på lager
  • Standard- eller specialkabellængder
Tryktransducere - Vis relaterede produkter


The PXM709GW Series Submersible Depth Transducers are designed to make precision level or depth measurements in fresh water or liquids compatible with 316 SS reliably for years in harsh industrial environments. Applications include Level Monitoring and Control, Depth Measurement, Surface Water Monitoring, Tank Level, Well Water Depth, Waste Water Applications, Dewatering Installations and Land Fill Water Levels .

Inconel® models are also available for oceanic research and highly corrosive or salt water applications. Consult Sales for availability.

The PXM709 series has the proven Omega MicroMachined silicon technology as its core sensor. The Piezoresistive technology uses precision solid state strain gauges molecularly embedded into a highly stable silicon wafer. The silicon is mounted in a sealed chamber and protected from the environmental fluids by a pressure sensitive stainless steel diaphragm. A very small volume of silicone oil transfers the pressure from the diaphragm to the silicon sensor. The cable is moulded onto the case using a unique high pressure, high temperature system to assure the best possible quality seal for long life and durability. This technology produces a very rugged, high stability sensor with exceptional accuracy, minimal thermal effects and long term reliability.

Approvals: RoHS compliant
Accuracy (Combined Linearity, Hysteresis and Repeatability): Standard ±0.20% BSL or high accuracy, option “HH”, ±0.08% BSL
Setting Accuracy Zero: ± 0.5% full scale typical, ± 1.0% full scale maximum (± 1.0% full scale typical, ± 2.0% full scale maximum for ranges = 170 mbar)
Setting Accuracy Span: ± 0.5% full scale typical, ± 1.0% full scale maximum (± 1.0% full scale typical, ± 2.0% full scale maximum for ranges = 170 mbar) calibrated in vertical direction with fitting down
Minimum Resistance Between Transducer Body and Any Wire: 100M Ω @ 50 Vdc (before surge protection)
Pressure Cycles: 1 million minimum
Long Term Stability (1 Year.): ±0.1% full scale typical
Operating Temperature: -18 to 79°C (0 to 175°F) with no solid freeze
Compensated Temperature: -1 to 32°C (30 to 90°F)
Thermal Effects (Over Compensated Range):
Zero Balance:
    Ranges >350 mbar (3.6 mH2O): ±0.3% span
    Ranges ≤350 mbar (3.6 mH2O): ±0.5% span
Span Setting:
    Ranges >350 mbar (3.6 mH2O): ±0.3% span
    Ranges ≤350 mbar (3.6 mH2O): ±0.5% span
Bandwidth: DC to 1 kHz typical
Response Time: <500 µsec, 0 to 90% step change
CE Compliant: Meets EN 61326-1: 2006 for industrial locations [certified with 91 m (300')]
Lightning Protection Option (if included): Integral lightning surge protection to IEC-61000-4-5 (Level 4)
Shock: 50 g, 11 ms, half-sine horizontal and vertical axis
Vibration: ± 20 g
    Gauge and Sealed Gauge:
    25 mbar (250 mmH2O): 10 times span
    70 mbar (0.7 mH2O): 6 times span
    170 mbar to 70 bar (1.7 to 714 mH2O) : 4 times span
Absolute: 350 mbar (3.6 mH2O) : 6 times span ranges
    >350 mbar (3.6 mH2O): 4 times span
Containment Pressure
    Gauge Pressure:
    25 to 350 mbar (0.25 to 3.6 mH2O): To 70 bar
    1 to 70 bar (10 to 714 mH2O): To 200 bar
    Absolute Pressure: 350 mbar to 70 bar (3.6 to 714 mH2O): To 400 bar
Wetted Parts: 316L stainless steel
Body Material: 316L stainless steel
Pressure Connection: 9/16-18 UNF female
Transducer Weight: 285 g (10 oz) typical depending upon configuration
Cable Construction: Polyurethane jacket with double Kevlar® reinforcing stringers, fused to case, with large vent tube
Cable Pull Strength: 109 kg (240 lb)
Cable Conductors: Four 24 AWG (19/36 stranded tinned copper) with ETFE insulation; meets MIL-W-22759/16 & SAE AS22759/16
Cable Sealing: Fused to case via molded Neoprene boot rated to 610 m (2000') depth
Standard Cable Lengths (metres): 3, 4.6, 6, 7.5, 9, 12, 15, 18, 20, 22.5, 30.5, 45, and 90 for other lengths contact Sales for lead times

All amounts shown in EUR
Noter: 1) Comes complete with 5-point NIST traceable calibration certificate.
2) To order with additional cable length, specify total length in meters, additional cost for length over 3 meters. i.e. PXM709GW-001BGI-12M (12 meter cable).
3) To order with optional 0.08% FS accuracy for extra cost, insert code “-HH” after “I”. I.E. PXM709GW-3.5BGI-HH.
4) To order with ½ NPT Conduit fitting for extra cost, specifiy Model PXM709C. i.e.PXM709CGW-170HGI.
5) To order with optional Lightning/Surge protection for extra cost, specify Model PXM709LGW, i.e. PXM709LGW-001BGI.

We noticed you are from the US. Visit your local site for regional offers and live support.