Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43
Layer N Banner

Smart Temperature and Humidity probe, Tube Housing

SP-004-1

Temperature, Humidity & Barometric Smart Probe with Tube Housing
 | SP-004-1

DKK845,00 SP-004-1

1 year warranty CE
  • Measured Temperature Range from:
    -40 to 85℃ (-40 to 185℉)
  • Humidity: 0 to 100% RH
  • 2x Digital I/O
  • Modular M12 construction
  • OMEGA Smart Core enabled

    -Data Logging

    -Integrated Alarm and Control

    -Plug and Play Device Detection

    -Sensor health monitoring

IIoT & Wireless Systems - Vis relaterede produkter

Beskrivelse

The Layer N SP-003 / SP-004 Environmental Monitoring Smart Probe provides temperature, relative humidity, and barometric pressure readings. The SP-003/ SP-004 accepts Layer N Smart Interfaces through its M12 8-pin connector.


Intuitive Configuration


Configure your Layer N Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.


Smart Core Enabled


Smart Core is integral to all Layer N Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.


Smart Interface Modularity


Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.


Edge Control and Built in I/O


The Layer N SP-003/SP-004 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-003/SP-004 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.


Your Data at a Glance with Layer N Cloud


Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.





Specifications


TEMPERATURE


Range: -40 to 850C (-40 to 1850F)
Accuracy: ±0.30C (±0.60F)
Response Time: Less than 1 second

RELATIVE HUMIDITY


Accuracy:

±2.5% (0 to 80%)
±3.5% (80 to 100%)

Hysteresis:±0.8%
Response Time: 8 seconds


BAROMETRIC PRESSURE


Accuracy Over Full Range: ±6 mbar from 300 to 1100 mbar
Accuracy @ 250C:±4 mbar from 700 to 1100 mbar

INPUT POWER


Voltage: 2.8 VDC - 3.3 VDC

DIO DIGITAL INPUTS


VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC

DIO DIGITAL OUTPUTS


2x Open Drain 100 mA max
VMAX= 30 VDC

ENVIRONMENTAL


Operating Temperature: -40 to 85? (-40 to 185?)
Rating: IP67 when mated

MECHANICAL


Tube Housing
Construction: Stainless Steel
Dimensions: 72 mm L x 15.9 mm OD (2.83” x 0.62”)
Bulkhead Housing
Construction: Aluminium
Dimensions: 73 mm L x 15.9 mm OD x 18.5 mm Panel Opening (2.83” x 0.62” x 0.72”)

GENERAL


Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks

M12 8-Pin Wiring

Pin Name Function
Pin 1 DIO 0 Discrete I/O Signal 0
Pin 2 INTR Interrupt Signal
Pin 3 SCL I2C Clock Signal
Pin 4 SDA I2C Data Signal
Pin 5 Shield Shield Ground
Pin 6 DIO 1 Discrete I/O Signal 1
Pin 7 GND Power Ground
Pin 8 3.3VDD Power Supply

Layer N SP-003 / SP-004 Variants


Model Number Description
SP-003-1 Temperature, Humidity, Barometric Pressure Smart Probe with discrete I/O - Tube Housing
SP-004-1 Temperature and Humidity Smart Probe with discrete I/O - Tube Housing
SP-004-4 Temperature and Humidity Smart Probe with discrete I/O - Bulkhead Housing

Layer N Smart Interface


Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem


Model Number Description
IF-001 USB Smart Interface
IF-002 RS485/Modbus Smart Interface

Accessories


An optional M12 5-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-014.


Model Number Description
M12.5-S-M-FM M12 5-pin screw terminal adapter
M12.8-T-SPLIT Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA 1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA 3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA 5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1 1m (3.3’) cable dual M12-8 straight connector
DM12CAB-8-3 3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5 5m (16.4’) cable dual M12-8 straight connector

Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Quick Ship
SP-003-1
DKK990,00
Beholdning: På lager
 
Smart Temperature, Humidity, Barometric probe, Tube Housing
Quick Ship
SP-004-1
DKK845,00
Beholdning: På lager
 
Smart Temperature and Humidity probe, Tube Housing
Quick Ship
SP-004-4
DKK920,00
Beholdning: 1 uge 
 
Smart Temperature and Humidity probe, Bulkhead Mount
Accessories
Layer N Smart Interfaces - Smart Probes must be connected to an interface to operate
Quick Ship
IF-001
DKK290,00
Beholdning: På lager
 
Wired Smart Probe interface with USB connection
Quick Ship
IF-002
DKK635,00
Beholdning: På lager
 
RS485/Modbus Smart Probe Interface with M12, 5 pin RS485 connection
Quick Ship
XW-ED
DKK1.375,00
Beholdning: 1 uge 
 
2.4 GHz Wireless Transmitter, Smart Probes - requires ZW-REC
Quick Ship
XW-ED-PRO
DKK1.590,00
Beholdning: 1 uge 
 
2.4 GHz Wireless Transmitter and Edge Controller, Smart Probes - requires ZW-REC
Accessories-M12 8 pin cables and connectors
Quick Ship
M12.8-T-SPLIT
DKK184,00
Beholdning: På lager
 
Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
Quick Ship
M12.8-S-M-FM
DKK99,00
Beholdning: 1 uge 
 
M12-8 pin Straight Plug Field install connector with screw terminals
Quick Ship
DM12CAB-8-1-RA
DKK172,00
Beholdning: 1 uge 
 
1m (3.3’) cable dual M12-8 connector, right angle terminator
Quick Ship
DM12CAB-8-3-RA
DKK214,00
Beholdning: På lager
 
3m (9.8’) cable dual M12-8 connector, right angle terminator
Quick Ship
DM12CAB-8-5-RA
DKK258,00
Beholdning: 1 uge 
 
5m (16.4’) cable dual M12-8 connector, right angle terminator
Quick Ship
DM12CAB-8-1
DKK172,00
Beholdning: På lager
 
1m (3.3’) cable dual M12-8 straight connector
Quick Ship
DM12CAB-8-3
DKK214,00
Beholdning: På lager
 
3m (9.8’) cable dual M12-8 straight connector
Quick Ship
DM12CAB-8-5
DKK258,00
Beholdning: På lager
 
5m (16.4’) cable dual M12-8 straight connector
All amounts shown in DKK
We noticed you are from the US. Visit your local site for regional offers and live support.