Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

Strain Gauge Adhesives and epoxy

TT300, SG496, SG401

Strain Gauge Adhesives and epoxy | TT300, SG496, SG401

Strain Gauge Adhesives and epoxy

DKK1.800,00 TT300

RoHS
  • Strain Gauge Adhesives
  • Two 1 oz Hardener Bottles (1/2 Filled)
  • Two Plastic Funnels (35 mm Dia.)
  • Two Brush Caps
  • One 2 oz Bottle of Acetone
  • One 2 oz Bottle of Acid Primer
  • One 2 oz Bottle of Neutralizer
  • One 2 oz Bottle of Resin Solvent
  • Operator’s Manual
Belastningsmålere, tilbehør og instrumenter - Vis relaterede produkter

Beskrivelse

OMEGA’s TT300 cement is a heat-cured, 2-part epoxy adhesive that can be used to bond polyimide-backed strain gauges for strain measurement up to 200°C (392°F). Each TT300 kit includes 2 bottles of resin and hardener that are pre-measured to ensure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for 1 minute.

A bottle each of hardener and resin produce approximately 3/4 oz of adhesive. The shelf life of the resin-hardener mixture is 6 weeks at room temperature. The shelf life of the unmixed components is indefinite, provided that the bottles are kept tightly sealed. Each TT300 kit includes 2 oz of acetone, acid primer, neutralizer, and rosin solvent for cleaning and preparing the surface, as well as 2 funnels and 2 cap brushes.

SG496 and SG401 are general purpose cold-curing, 1-part strain gauge glues. They are the most commonly used adhesives for strain gauges. They cure in 1 minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate, and SG496 is a methyl-based cyanoacrylate. They have a 1-year shelf life at room temperature, but shelf life may be longer at colder temperatures. The strain gauge gluetemperature range is -54 to 82°C (-65 to 180°F).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for products on this page. You will be contacted by Internet Sales to confirm after the order is placed.
Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.
Antal 
RoHS
Beskrivelse
Quick Ship
Click to expand/minimize a list of what others bought with theTT300
TT300
DKK1.800,00
Beholdning: 8 uger 
RoHS compliant
Complete strain gauge adhesive kit including heat cure TT300 Cement
Quick Ship
Click to expand/minimize a list of what others bought with theSG496
SG496
DKK240,00
Beholdning: 1 uge 
RoHS compliant
1 oz methyl-based cyanoacrylate for metals (approx. 750 gages)
Quick Ship
Click to expand/minimize a list of what others bought with theSG401
SG401
DKK76,00
Beholdning: 1 uge 
RoHS compliant
0.1 oz ethyl-based cyanoacrylate for porous materials (approx. 50 gages)
All amounts shown in DKK