Varmeledende epoxy og varmeledende smørefedt

OB-200 Epoxy Series & OT-201 Thermal Grease

^€19,04 OB-101-1/2

PLACE ORDER

Varmeledende
Elektrisk isolator
Tåler olie, opløsningsmidler, de fleste syrer
OMEGABOND™ 101 tokomponent epoxy: Høj varmeledningsevne. Hærder ved stuetemperatur, kan anvendes op til 105° C
OMEGABOND™ 200 tokomponent epoxy: Meget høj varmeledningsevne. Hærder på 2 timer ved 205° C. Kan anvendes op til 260° C
OMEGATHERM™ 201 silikonepasta: Særdeles høj varmeledningsevne. Klæber ikke. Hærder ikke. Kan anvendes fra -40 til 200° C

Tilbehør - Vis relaterede produkter

Beskrivelse

OMEGABOND™ epoxy and OMEGATHERM™ thermal conducting paste are high temperature and high thermally conductive epoxies and silicone products. They are specially formulated for permanent bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces–metals, ceramics, glass, plastics and paper products.
OMEGABOND™ and OMEGATHERM™ products are compounded and packaged for convenient, easy mixing and application. Each formulation exhibits important characteristics necessary for accurate, fast, reliable temperature measurement. These are: good adhesion and strength, high temperature rating, high thermal conduction, high electric insulation, thixotropic consistency, fast cure, and easy application.

OMEGABOND™ is supplied in “Twin pak” packaging to ensure the user with accurate proportioning of resin and catalyst, as well as to provide a clean, fast means of mixing. The “Twin Pak” is a flexible, transparent plastic pouch, separated into two isolated compartments by means of a removable external divider. In one compartment is the resin, the other the pre-measured catalyst. To use, remove the divider, mix the two components by kneading the pouch, then snip off a corner to dispense. Each “Twin Pak” comes with an instruction sheet, enclosed in a clear, heat-sealed plastic envelope.

Please note that once mixed, the OB-101 and OB-200 epoxies have the following "Working Times" (also referred to as "Pot Life"):
OB-101: Approximately 30 Minutes at Room Temperature
OB-200: Approximately 24 Hours at Room Temperature

For complete product specifications see the RELATED LINKS section at the bottom of this page.

Til bestilling(Angiv modelnummer)

Andre har købt: Du kan klikke på dette ikon og få vist en liste over produkter, som andre har købt sammen med denne model.

Vare nummer/Desc.

Antal

Beskrivelse

Highly Thermally Conductive Ambient Cure Epoxy

OB-101-1/2

Kontakt salgsafdelingen

Beholdning:

This part is temporarily unavailable. Please see OB-102-1-2 as a possible replacement.

14g, highly conductive room-temperature cure, two part epoxy

OB-101-2

Kontakt salgsafdelingen

Beholdning:

This part is temporarily unavailable. Please see OB-102-2 as a possible replacement.

56g, highly conductive room-temperature cure, two part epoxy

OB-101-16

€124,01

Beholdning: 1 uge

This part is temporarily unavailable. Please see OB-102-16 as a possible replacement.

450g, highly conductive room-temperature cure, two part epoxy

Very Highly Thermally Conductive Epoxy

OB-200-2

€101,16

Beholdning: 19 uger

56g, highly conductive two part epoxy to 260°C

OB-200-16

€165,19

Beholdning: På lager

450g, highly conductive two part epoxy to 260°C

Thermally Conductive Silicone Paste

OT-201-1/2

Kontakt salgsafdelingen

Beholdning:

14g, thermally conductive silicone paste

OT-201-16

€197,10

Beholdning: 4 uger

450g, thermally conductive silicone paste

OT-201-32

Kontakt salgsafdelingen

Beholdning:

Two 450g cans, thermally conductive silicone paste

OB-102-16

€150,44

Beholdning: 4 uger

Highly conductive, room temperature cure, OMEGABOND 102 epoxy, 16 oz resin, 1 oz catalyst (mix ratio 100 parts material to 3.5 parts catalyst by weight)

OB-102-1/2

€54,99

Beholdning: På lager

Highly conductive, room temperature cure, OMEGABOND 102 epoxy, 1/2 oz resin, 1/2 oz catalyst (mix ratio 100 parts material to 3.5 parts catalyst by weight)

OB-102-2

€72,62

Beholdning: På lager

Highly conductive, room temperature cure, OMEGABOND 102 epoxy, 2 oz resin, 1/2 oz catalyst (mix ratio 100 parts material to 3.5 parts catalyst by weight)