Cookies på Omegas websteder
Vi anvender cookies på vores websted. Disse cookies er afgørende for, at webstedet kan fungere korrekt.
Hvis du fortsætter uden at ændre dine indstillinger, antager vi, at du gerne vil modtage alle de cookies, der anvendes på dette websted. Du finder flere oplysninger om cookies ved at klikke her
Luk
Kurv  |  Kontakt  | 
GRATIS TELEFON (Kun Danmark. Alle opkald besvares på engelsk) 80 25 14 43
INTERNATIONAL(+45) 80 25 14 43

AC Powered Frequency Input DIN Rail Signal Conditioner

DRI-FR

Frequency transmitter | DRI-FR

Frequency transmitter

DKK2.895,00 DRI-FR

1 year warranty CE
  • 3-way Isolation, Eliminates Earth Loops
  • User Configurable Input Ranges 2 Hz to 10,000 Hz
  • 150 mV to 150V Input Amplitude
  • 8 Vdc Excitation Supply for Open Collector or Contact Closure Inputs
  • Output Ranges: 0-5 V, 0-10 V, 0-1 mA, 0-20 mA, 4-20 mA
  • Universal AC Powered: 85 to 265 Vac
Procesmåling og instrumenter til styring - Vis relaterede produkter

Beskrivelse

The input of the DRI-FR can be configured for any frequency span from 2 to 10,000 Hz. The input amplitude threshold sensitivity can be adjusted from 150 mV to 150 V rms to ensure accurate frequency measurement and minimize transient noise related errors.
The output can be set for either 0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA or 4 to 20 mA.

The DRI-FR has a live scaling feature to greatly simplify configuration. The high and low input ranges are stored in non-volatile memory and correspond to the high and low output range which is selected via DIP switches.

Any 2 Hz range from 0 to 10,000 Hz can be converted to a full scale output signal (e.g. 0 to 2 Hz/4 to 20 mA or 9998 to 10,000 Hz/4 to 20 mA).

The factory default configuration for the DRI-FR is as follows:

Input Range:
0 to 1000 Hz
Sensitivity (Noise Rejection Level or Trigger Threshold of the Input): 1 Vrms
Output Range: 4 to 20 mA

Specifications
INPUT
Frequency:

    Full Scale Range: 2 Hz to 10,000 Hz
    Amplitude Range: 150 mVp to 150 Vrms
    Impedance: >10 kΩ
    Over-voltage: 180 Vrms max
    Over-Range: 20 KHz max
    Common Mode (Input to Gnd): 1800V max
    Zero Turn-Up: 99% of full scale range (9998 Hz)
    Span Turn-Down: 99% of full scale range (2 Hz)

OUTPUT
Voltage Output:
    Range: 0 to 5V, 0 to 10V (dip-switch selectable)
    Source Impedance: <100 Ω
    Drive: 10 mA max (1 kΩ min @ 10 V)
Current Output:
    Output: 0 to 1 mA, 0 to 20 mA, 4 to 20 mA (dip-switch selectable)
    Source Impedance: >100 kΩ
    Compliance:
        0 to 1 mA: 7.5V max (7.5 kΩ max)
        0 to 20 mA: 12V max (600 Ω max)
        4 to 20 mA: 12V max (600 Ω max)
Accuracy (Including Linearity and Hysteresis): ±0.1% of selected range at 25°C
Temperature Stability: ±0.025%/°C maximum of selected range
Excitation Voltage: 8 Vdc, for open collector and contact closure inputs (5 mA short circuit current max)
Response Time (10 to 90%): 500 msec, or 100 times the period of the full scale frequency
Common Mode Rejection: DC: 100 dB; >60 Hz: 80 dB
Isolation: 1800 Vdc between input, output and power
ESD Susceptibility: Capable of meeting IEC 801-2 level 3 (8 KV)
LED Indication:
    LVL (Green): Lit when power is on; input <107% then 8 Hz flash; input >-7% then 4 Hz flash
    IN (Yellow): Input range programming status
    OUT (Red): Output range programming status
Humidity (Non-Condensing):
    Operating: 15 to 95% RH @ 45°C
    Soak: 90% RH for 24 hours @ 65°C
Temperature Range:
    Operating: 0 to 55°C
    Storage: -25 to 70°C
Power: 100 to 240 Vac ±10%, 50 to 400 Hz; 2.5 W max
Wire Terminations: Screw terminals for 12 to 22 AWG
Weight: 227 g
Til bestilling(Angiv modelnummer)
Vare nummer/Desc.
Antal 
Beskrivelse
Quick Ship
DRI-FR
DKK2.895,00
Beholdning: 9 uger 
 
AC powered frequency input DIN rail signal conditioner
Accessories
Quick Ship
ACPB-2
DKK247,00
Beholdning: 9 uger 
 
AC power distribution bus for 2 modules
Quick Ship
ACPB-4
DKK630,00
Beholdning: 9 uger 
 
AC power distribution bus for 4 modules
Quick Ship
ACPB-8
DKK860,00
Beholdning: 9 uger 
 
AC power distribution bus for 8 modules
All amounts shown in DKK
Noter: An ACPB power rail is required to power the modules and is ordered separately.
Ordering Example: (1) DRI-FR AC powered frequency input DIN rail signal conditioner, DKK2.895,00  plus (1) RAIL-35-1 35 mm DIN rail, 1 metre, DKK79,00, DKK2.895,00 + 79,00 = DKK2.974,00